If the battery type or capacity setting is inconsistent with the actual, the
charge/discharge current may be less than the actual charge/discharge ability.
However, the system can operate normally. Proceed as follows to modify.
1. Stop the inverter via the LCD menu.
2. Reset the battery type and parameters. Proceed as follows to enter the
submenu.
3. Start the inverter via the LCD menu.
7.4.3 System Time
The correct system time is very important. If there is deviation between the
system time and the local time, the inverter will not operate normally. The clock
is in 24-hour format. Proceed as follows to set the correct time.