Sungrow SH3K6 - Electrical Connection; Inverter Terminal Overview

4 Unpacking and Storing User Manual
28
Single-phase meter
Three-phase meter
Wi-Fi module
S
ET
4.3 Storing the Inverter
If you do not install the inverter immediately, choose an appropriate location to
store it. Instructions for storage are:

The inverter must be stored in the original packaging.

The storage temperature should be always between -30°C and +70°C, and
the storage relative humidity should be always between 0 and 100 %,
non-condensing.
The following figure shows the storage of the inverter.
-30
℃
+
70
℃
Relative Humidity:
0–100 %
Fig. 4-3 Example of Inverter Storage
The packaging should be upright.
When storing inverters, do not stack more than 5 inverter packages on
top of each other.