Sungrow SH3K6 - Viewing the Error Codes

10 Appendix II: LCD Operation User Manual
90
If the protection function is triggered, the inverter will automatically disconnect
from the grid with the ”Error” status displayed on the LCD main screen. After the
grid voltage or frequency recovers to the specified range, the inverter will start
running normally and connect to the grid. For the recovery conditions, see
“10.4.6 Setting the Protective Parameters”.
Press and Press ENT to input the password
111.
Press ENT to confirm the password.
Password:
1 1 1
Country
Only the codes of GB, DE, IT, AT, AU, BE, NL, LUX,
CN and SA are supported.
Country
Country：
[ DE ]
Tab. 10-3 Country Code Descriptions
Country Code
Full Name
Language
GB
Great Britain
English
DE
Germany
German
IT
Italy
Italian
AT
Austria
German
AU
Australia
English
BE
Belgium
French
NL
Netherlands
Dutch
LUX
Luxembourg
Dutch
CN
China
Chinese
SA
South Africa
English
Other
Country not included above
English
10.7 Viewing the Error Codes
Viewing the Active Error
For the
!
icon or the “Error” status on the
main screen, press to view the active
errors. Refer to “8.1.2 Errors on the App or
LCD Screen” for the error definition.
Error Active P1/1
001 GRID 008
Code
Type