EasyManua.ls Logo

sunjoe LJ10M - User Manual

sunjoe LJ10M
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2015 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
A Division of Snow Joe
®
, LLC
Model LJ10M
OPERATOR’S MANUAL
SAVE THESE INSTRUCTIONS
10-TON HYDRAULIC LOG SPLITTER
Form No. SJ-LJ10M-880E-M
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
The operator must read and understand all safety and warning
information, operating instructions, maintenance, and storage
instructions before operating this equipment. Failure to
properly operate and maintain the log splitter could result in
serious injury to the operator or bystanders.
mDANGER! This symbol indicates a hazardous situation,
which, if not followed, will result in serious injury or death.
mWARNING! This symbol indicates a hazardous
situation, which, if not avoided, could result in serious injury
or death.
mCAUTION! This symbol indicates a hazardous situation,
which, if not avoided, could result in minor or moderate injury.
General Safety Warnings!
Anyone who intends to operate this tool must read and
understand all the safety and other information contained in
this manual before rst use. Save this manual and review it
frequently prior to using this tool and when instructing others
on the proper operating procedures.
1. Keep work area clean and well-lit – Set up the
equipment and use it only on a at and level surface in an
outdoor, well-ventilated area.
2. Replacement parts – When servicing this unit, use only
identical replacement parts.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
5. Wear personal protective equipment – When using this
tool, wear safety glasses with side shields or goggles to
provide necessary eye protection. Wear ear defenders to
prevent hearing damage when necessary. Use a face or
dust mask if the work environment is dusty.
6. Store idle tool indoors – When not in use, the log splitter
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
7. Maintain the log splitter with care – Keep the log splitter
clean for optimal performance and to reduce the risk of
injury. Follow the additional recommendations described
in the maintenance section of this manual.
8. Use the right tool – Do not use the tool for any job except
that for which it is intended.
9. Stay alert – Watch what you are doing. Use common
sense. Do not operate the log splitter when you are
tired or under the inuence of drugs, alcohol, or other
medication.
Operation Warnings
Do not at any time carry passengers, sit, or stand on the log
splitter.
Do not allow children to play on, stand upon, or climb on
the log splitter.
Always inspect the log splitter before using to ensure it is in
proper working order.
Replace or repair damaged or worn parts immediately.
Always use the splitter on a at and level surface.
Always check and tighten hardware and assembled parts
before operation.
Only use the log splitter for its intended purpose: splitting
logs.
Do not exceed the maximum permitted log length of 18 in.
(45.7 cm) or the maximum permitted log diameter of 8 in.
(20.3 cm).
Always split wood in the direction of the grain. Do not split
wood against the grain.
Do not exceed the equipment's maximum load capacity of
10 tons.
Never leave the log splitter unattended while operating the
equipment.
Keep area around the log splitter clear of debris to prevent
injury.
Always clear away wood pieces from the work area before
splitting another log.
Do not tow the log splitter with any motorized vehicles,
such as lawn and garden tractors or ATVs.
1

Questions and Answers

Summary

Safety Instructions

General Safety Guidelines

Read and understand all safety info. Keep work area clean, dress properly, use PPE, keep others away.

Operation Safety Rules

Inspect unit, maintain parts, use on level surface, split logs correctly, stay alert, and follow all warnings.

Crush and Cut Hazard Prevention

Wood Condition Guidelines

Understanding Safety Symbols

Read Operators Manual

Read, understand, and follow all instructions before assembly and operation.

Safety Alerts and Warnings

Understand general alerts, warnings about movement, and environmental hazards.

Personal Protective Equipment (PPE)

Wear eye/hearing protection, gloves, and boots for safety.

Know Your Log Splitter

Log Splitter Components

Identifies and lists key parts: handles, wheel, oil plug, pump, rod, plate, cradle, wedge, socket.

Technical Specifications

Splitting Force and Capacity

Details max splitting force, ram force, log length/diameter capacity.

Physical and Hydraulic Data

Lists material, cylinder/rod size, hydraulic capacity, wheel size, and weight.

Unpacking and Assembly

Carton Contents Check

Verify all items are supplied and inspect for damage. Contact customer service for missing/damaged parts.

Attaching the Handles

Instructions on how to insert operation handles into the hydraulic pump sockets.

Operation and Splitting

Log Preparation and Loading

Ensure logs meet size requirements and are cut square. Handle logs by the bark side.

Splitting Process

Load log lengthwise, pump handles, and operate from the safe side of the unit.

Removing Split Pieces

Remove split pieces, retract ram using hand wheel, and prepare for the next log.

Troubleshooting Common Issues

Ram Not Moving

Check hand wheel, wedged wood, hydraulic lines, control valve, or cylinder piston.

Slow Ram Speed

Address slow pumping, air in reservoir, control valve issues, or cylinder damage.

Wood Splitting Slowly

Check for air in reservoir, valve vacuum, control valve setting, or cylinder damage.

Maintenance and Storage

Bleeding the Log Splitter

Procedure to extend ram, check oil, turn hand wheel to retract, and add oil if needed.

General Maintenance Tips

Apply rust-resistant oil, check fasteners, clean/lubricate parts, touch up paint.

Storage Recommendations

Store clean and dry indoors, retract ram, lubricate metal surfaces, and examine for damage.

Service and Support

Contacting Support

Contact customer service for service, maintenance, or part replacement needs.

Model and Serial Numbers

Record model and serial numbers for service, reordering parts, or arranging service.

Customer Promise and Warranty

Warranty Coverage

Two-year warranty against defects in material or workmanship for normal residential use.

Obtaining Replacement Parts

Instructions to obtain replacement parts or product via snowjoe.com/help or email.

Exclusions and Limitations

Excludes wearing parts, batteries (90-day limit), and consequential damages.

Summary

Safety Instructions

General Safety Guidelines

Read and understand all safety info. Keep work area clean, dress properly, use PPE, keep others away.

Operation Safety Rules

Inspect unit, maintain parts, use on level surface, split logs correctly, stay alert, and follow all warnings.

Crush and Cut Hazard Prevention

Wood Condition Guidelines

Understanding Safety Symbols

Read Operators Manual

Read, understand, and follow all instructions before assembly and operation.

Safety Alerts and Warnings

Understand general alerts, warnings about movement, and environmental hazards.

Personal Protective Equipment (PPE)

Wear eye/hearing protection, gloves, and boots for safety.

Know Your Log Splitter

Log Splitter Components

Identifies and lists key parts: handles, wheel, oil plug, pump, rod, plate, cradle, wedge, socket.

Technical Specifications

Splitting Force and Capacity

Details max splitting force, ram force, log length/diameter capacity.

Physical and Hydraulic Data

Lists material, cylinder/rod size, hydraulic capacity, wheel size, and weight.

Unpacking and Assembly

Carton Contents Check

Verify all items are supplied and inspect for damage. Contact customer service for missing/damaged parts.

Attaching the Handles

Instructions on how to insert operation handles into the hydraulic pump sockets.

Operation and Splitting

Log Preparation and Loading

Ensure logs meet size requirements and are cut square. Handle logs by the bark side.

Splitting Process

Load log lengthwise, pump handles, and operate from the safe side of the unit.

Removing Split Pieces

Remove split pieces, retract ram using hand wheel, and prepare for the next log.

Troubleshooting Common Issues

Ram Not Moving

Check hand wheel, wedged wood, hydraulic lines, control valve, or cylinder piston.

Slow Ram Speed

Address slow pumping, air in reservoir, control valve issues, or cylinder damage.

Wood Splitting Slowly

Check for air in reservoir, valve vacuum, control valve setting, or cylinder damage.

Maintenance and Storage

Bleeding the Log Splitter

Procedure to extend ram, check oil, turn hand wheel to retract, and add oil if needed.

General Maintenance Tips

Apply rust-resistant oil, check fasteners, clean/lubricate parts, touch up paint.

Storage Recommendations

Store clean and dry indoors, retract ram, lubricate metal surfaces, and examine for damage.

Service and Support

Contacting Support

Contact customer service for service, maintenance, or part replacement needs.

Model and Serial Numbers

Record model and serial numbers for service, reordering parts, or arranging service.

Customer Promise and Warranty

Warranty Coverage

Two-year warranty against defects in material or workmanship for normal residential use.

Obtaining Replacement Parts

Instructions to obtain replacement parts or product via snowjoe.com/help or email.

Exclusions and Limitations

Excludes wearing parts, batteries (90-day limit), and consequential damages.

sunjoe LJ10M Specifications

General IconGeneral
TypeElectric Log Splitter
Maximum Splitting Force10 Tons
Maximum Log Length18 in. (45.7 cm)
Weight97 lbs (44 kg)
MaterialSteel
Power SourceElectric
Motor15 Amp
Splitting Force10 Tons
Log Capacity10 Inches
Maximum Log Diameter10 in. (25.4 cm)

Related product manuals