sunjoe PPG300 - Operation and Maintenance

8
Using the LED lights
1. Turn on the power station by pressing and hold the power
switch until the LCD screen shows the standby display
(Fig. 6).
2. Press the LED light switch to turn on the worklight (both
LEDs). Press it again to turn o the worklight (Fig. 10).
3. Hold the power station by the handle to use it as a
spotlight (Fig. 11).
Turning o the Power Station
NOTE: To avoid depleting the battery power, make sure to turn
o the power station when not in use.
1. Switch o the working circuit by pressing the
corresponding output switch and disconnect all devices.
2. Press the power switch to turn o the power station.
Operation Tips
1. This product may become hot during charging, this is
normal.
2. Avoid storing this device near coins, jewelery, keys, and
other metal objects. An accidental electrical discharge
may cause damage.
Fig. 10
LED light switch
LED lights
LCD Screen (LED
light mode)
R
Fig. 11
3. Do not place the unit near or under intense heat or re.
4. The unit is not waterproof, avoid water and other liquids.
5. Do not drop the unit. Do not place heavy objects on the
product.
6. Do not cover this product with towels, clothing during use.
7. Do not charge the power station longer than the time
required to fully charge.
Maintenance
m
WARNING! Always switch the product o and
disconnect any devices plugged in before performing
inspection, maintenance, and cleaning work.
mWARNING! When servicing, use only identical
replacement parts. Use of any other parts could create a
hazard or cause product damage.
General Maintenance
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
mWARNING! Do not at any time allow brake uids,
gasoline, petroleum-based products, penetrating oils, etc to
come into contact with plastic parts. Chemicals can damage,
weaken or destroy plastic, which could result in serious
personal injury.
Storage
• Switch o the power station, disconnect all appliances.
Thoroughly clean the housing with a soft, dry cloth.
• Store the device indoors in a safe location out of the reach
of children. Keep away from corrosive agents, such as
garden chemicals and de-icing salt.
Disposal
Recycling the Device
• Do not dispose this power station as unsorted municipal
waste. Use appropriate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landlls or dumps,
hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and well-
being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.