sunjoe SJH904E - User Manual

© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®
, LLC Model SJH904E Form No. SJ-SJH904E-880E-MR3
R
OPERATOR’S MANUAL
ELECTRIC POLE + HEDGE TRIMMER
19-INCH | 4.5-AMP | MULTI-ANGLE HEAD
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this power tool must read,
understand, and follow these instructions in their entirety.
Failure to follow these instructions may result in ELECTRIC
SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol
m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Before using the power tool, familiarize yourself with the
controls, especially how to stop the power tool in an
emergency. The only individuals who should use the power
tool are those who thoroughly understand these instructions
and know how to properly operate the unit. Children should
never be allowed access to the power tool.
Retain this manual for future reference and reread it at the start
of each trimming season.
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cords immediately.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls. Ensure
the controls (start/stop) function properly before using.
5. Use the right tool – Do not use this power tool for any job
except that for which it was intended.
6. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
7. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
8. Avoid accidental starting – Do not carry the power tool
with your nger on the switch. Make sure the switch is o
before plugging in or unplugging the unit.
mCAUTION! Moving parts will continue to run for several
seconds after turning o the machine.
9. Do not abuse the cord – Never carry the power tool
by the cord or yank the cord to disconnect it from the
receptacle. Keep the cord away from heat, oil, and sharp
edges.
10. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at
all times.
13. Use safety glasses – Also use safety footwear, snug-
tting clothing, protective gloves, hearing, and head
protection.
14. Disconnect the tool – Disconnect the power tool from
the power supply when it is not in use, before servicing
it, when changing accessories, and when performing any
other maintenance task.
15. Store idle tool indoors – When not in use, the power tool
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
16. Maintain the power tool with care – Keep the cutting
edges sharp and clean for optimal performance and
to reduce the risk of injury. Inspect the extension cord
periodically and immediately replace it if damaged. Keep
the handles dry, clean, and free from oil and grease.
Follow the additional recommendations described in the
maintenance section of this manual.

Summary

Safety Instructions

General Safety Warnings

Essential safety guidelines for all operators before using the power tool.

Keep Work Area Clean and Well-Lit

Maintain a tidy and illuminated workspace to prevent accidents.

Dress Properly

Wear appropriate clothing and footwear to avoid entanglement or injury.

Avoid Accidental Starting

Ensure the switch is off before plugging in or unplugging the unit.

Specific Safety Warnings for Hedge Trimmer;Pole Hedge Trimmer

Keep Body Away From Cutting Blade

Maintain a safe distance from moving blades to prevent cuts.

Carry Trimmer With Blade Covered

Always cover the blade when transporting or storing the trimmer.

Keep Extension Cord Away From Cutting Area

Prevent the cord from being accidentally cut by the blade.

Electric Safety

GFCI and Extension Cord Use

Use GFCI protection and appropriate outdoor extension cords.

Ground Fault Protection

Utilize RCD for damp locations and avoid grounded surfaces.

Double-Insulated Appliances

Servicing and Parts

Proper servicing requires qualified personnel and identical replacement parts.

Safety Symbols

Symbol Descriptions

Explanation of various symbols used throughout the manual.

Know Your Electric Pole + Hedge Trimmer

Component Identification

Diagram illustrating the location of controls and parts.

Technical Data

Specifications and measurements for the trimmer.

Unpacking

Carton Contents

List of items included in the product packaging.

Inspection and Handling

Checking for damage and contacting customer service.

Assembly

Fitting the Hedge Trimmer

Instructions for attaching the rear handle to the cutting head.

Converting to Pole Hedge Trimmer

Steps to attach the telescoping pole and rear handle.

Operation

Connecting to Power Supply

Properly connecting the extension cord to the unit.

Starting the Pole + Hedge Trimmer

Safety checks and procedures for starting the trimmer.

Adjusting Pole Hedge Trimmer Pivoting Head

Rotating the cutting head to different angles.

Extending the Telescoping Pole

Adjusting the pole length for optimal reach and use.

Cutting Tips

General Precautions

Hold with both hands, clear area, and maintain stable footing.

Using the Pole Hedge Trimmer

Techniques for stable operation and avoiding hazards.

Cutting Procedures

Trimming Techniques

Using sweeping actions and handling various stem thicknesses.

Horizontal and Vertical Cuts

Methods for making precise horizontal and vertical cuts.

Trimming Hedges and Shrubs

Techniques for bottoms, sides, and low-lying foliage.

Blade Limitations

Maximum stem thickness and intended use for normal shrubbery.

Care + Maintenance

Lubricate and Sharpen Blades

Procedures for maintaining blade sharpness and lubrication.

Cleaning, Storage, and Disposal

Guidelines for cleaning, storing, and environmentally friendly disposal.

Service + Support

Contact Information

Customer service phone number for assistance.

Model + Serial Numbers

Location and importance of product identification numbers.

Troubleshooting

Common Problems and Solutions

Table of common issues and their recommended solutions.

sunjoe SJH904E Specifications

General

Cutting Width	14 inches
Adjustable Handle	Yes
Power Source	Electric
Voltage	120V
Cutting Path	14 inches
Line Diameter	0.065 inches
Warranty	2 years
Amperage	4.5 Amp
Type	Electric