9
• Remove objects around the appliance to ensure a well
ventilated area.
• When the heater is cooled down, plug in the heater again
and resume using.
Tipping-Over Protection
The infrared heater is also equipped with tipping over
protection, which will turn o the heater when it tilts around 40
degrees or more. Place the heater on a at, smooth, and stable
surface in order to prevent it from tipping over.
Maintenance
To enjoy years of outstanding performance from the infrared
heater, make sure you perform the following maintenance
activities on a regular basis.
mWARNING! DO NOT touch or move the appliance
for at least 30 – 45 minutes after use. Allow all heating
elements to cool before touching.
Cleaning
1. Turn o and unplug the appliance. Wait for the appliance
to cool down completely.
2. Clean the external surface by wiping it with a soft, damp
cloth. Do not use any abrasive detergent on the appliance
as it will cause damage.
Storage
1. Turn o and unplug the appliance. Wait for the appliance
to cool down completely. Store the appliance in a dry,
indoor space covered with the included cover.
2. Do not place any heavy items on top of the appliance as
this may cause damage to the appliance.
Support
If your Sun Joe
®
SJPH1500E infrared heater requires service or
maintenance, please call 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Model and Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide
the model and serial numbers, which can be found on the
decal located on the unit. Copy these numbers into the space
provided below.
Record the following numbers from your new product:
Model #:
Serial #:
S J P H 1 5 0 0 E
To Previous Page
Loading...