Sunjoy 80QT User Manual

WARNING:
Keep all children and pets away from assembly area. Children and pets should be supervised when they are
in the area of the Cooler construction.
Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
Assemble on level ground.
For outdoor use only.
ITM.ART. L-BC009PSS-20
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Commercial Stainless Steel 80QT Cooler
Assembly and Care Instructions
IMPORTANT
Please read all the safety guidelines before usage of your new wood-burning fire pit. The safe burning
guidelines are located below and in your owner’s manual. If you have any questions regarding this
product, please call Sunjoy Industries at 1-866-578-6569 from 8:30AM to 5:30PM EST, or email us at
customer.care@sunjoygroup.com , or visit www.sunjoyonline.com for assistance.

Sunjoy 80QT Specifications

General

Brand	Sunjoy
Model	80QT
Category	Accessories
Language	English

Summary

Safety and Important Information

Assembly Warnings

Keep children and pets away from assembly area; ensure adequate clearance and follow basic safety precautions.

Usage Guidelines

Check bolts for tightness regularly and assemble on level ground. Product is for outdoor use only.

Important Safety Notice

Read safety guidelines before use and contact customer service for questions regarding product usage.

Product Components and Assembly

Parts List

Detailed list of all parts included with the 80QT Cooler, including descriptions and quantities.

Assembly Step 1

Assemble legs to the cooler body and connect rails, leaving bolts slightly loose initially.

Assembly Step 2

Attach decorative rings to legs, insert bottom shelf, and assemble wheels onto legs.

Assembly Step 3

Turn cooler body, fix body handle to the cooler body, and tighten all bolts.

Assembly Step 4

Connect bottle opener and attach cap catcher to the cooler body as per instructions.

Assembly Step 5

Fix cover handle to the cover using bolts and washer, then place cover onto cooler body.

Care and Maintenance

Cleaning Instructions

Clean the cooler completely with a soft dry towel before and after use, ensuring it is dry.

Rust Management

If rust develops, lightly sand the affected area and wipe thoroughly.