Sunjoy L-GZ822PCO User Manual

1
Domed 10' x 13' Gazebo
Item# L-GZ822PCO
Congratulations on your purchase of our Domed 10’ x 13’ Gazebo. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
WARNING:
 This unit is heavy. Do not assemble this item alone. 6 to 8 people are recommended for safe assembly.
 Keep all children and pets away from assembly area. Children and pets should be supervised when
they are in the area of the Gazebo construction.
 Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
 Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to the product.
 Please read all instructions before assembly and use.
 Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
 Assemble on level ground.
 For outdoor use only
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and
easy operation. Keep this manual for future reference.
We would like to hear from you with any comments or suggestions. In the continental U.S., you
can call us toll-free at 1-888-301-0332 from 8 a.m. to 5 p.m. CST Monday – Friday. You can also
send us an email using the feedback icon at SamsClub.com.

Sunjoy L-GZ822PCO Specifications

General

Brand	Sunjoy
Model	L-GZ822PCO
Category	Outdoor Furnishing
Language	English

Summary

Parts List

Hardware Pack 1

Assembly Step 1

Assemble Mosquito Netting Runners

Assemble Long Mosquito Netting Runner 1&2 by Beam Connector, Bolt, and Flat Washer.

Attach Base to Post

Securely attach the base to the post using bolts and flat washers.

Connect Runners to Poles

Connect assembled netting runners to poles with bolts and washers.

Insert Short Netting Runners

Insert short netting runners into gaps and secure with bolts.

Connect Pole Support Slice

Connect pole support slice to post and netting runners using bolts.

Hardware Pack 2

Assembly Step 2

Connect Top Beams and Hooks

Insert top connecting middle beam into top connector and screw on hook.

Insert Oblique Beams

Insert oblique beams into top connector and bottom connecting beams.

Insert Middle Beams

Insert middle beams into the top connector.

Attach Middle Beams and Canopy

Attach middle beams to beam connectors and place big canopy.

Attach Baffles

Attach baffles to netting runners using bolts and flat washers.

Assemble Small Top Structure

Insert small top beams and arc beams into small top connector.

Attach Small Canopy

Place small canopy on small top arc beam and attach.

Assembly Step 3

Connect Stakes to Base

Connect stakes to the base and secure to the ground.

Attach Mosquito Netting and Curtains

Connect netting and curtains to hooks; netting inside, curtains outside.

Set Big Canopy

Set the big canopy by inserting hooks into the grooves on the beam.

Hardware Pack 3

Care and Maintenance

Limited Manufacturer's Warranty

Warranty Exclusions

Backup Hardware List