Need help?Do you have a question about the SUNKET-ESS LFP 5kWh/ LV and is the answer not in the manual?
Safety warnings about potential dangers and critical cautions.
Cautions regarding proper use, potential issues, and operational guidelines.
Declares the manual's purpose and scope for the battery module.
States that only qualified professionals should handle the device and explains cautionary symbols.
Introduces the LFP battery as a new power storage product for home use.
Details the features and advantages of the LFP energy storage product.
Defines product identity and shows nameplates for 5kWh and 10kWh models.
Provides size and weight specifications for LFP 5kWh/LV and 10kWh/LV models.
Details key performance parameters like energy, power, voltage, and current.
Explains the interface functions of the device's front panel.
Defines the various ports and LED indicators on the device.
Explains discharging low voltage and charging over voltage protection mechanisms.
Describes over-current protection during charging and discharging.
Explains temperature protection during charging and discharging.
Details short circuit protection and self-shutdown features.
Covers general safety requirements and preparations before installation.
Specifies working and charging/discharging temperature ranges, humidity, and operating environment.
Lists hardware tools and meters required for installation.
Details electrical interface checks and security checks before installation.
Covers procedures for equipment arrival, loading, and unloading at the installation site.
Details the list of accessories included in the battery system package.
Outlines considerations for power line, mounting space, and wiring before installation.
Strongly recommends floor installation and outlines wall mounting requirements if used.
Provides detailed steps for mounting the battery system on the floor.
Details the accessories and steps required for mounting the battery on a wall.
Describes the step-by-step procedure for wall mounting the battery system.
Explains methods for measuring cable continuity and short circuits.
Details how to connect the battery system to an inverter, including DIP switch settings.
Explains how to connect the CAN cable for communication between the battery and inverter.
Defines the pin layout and function for the communication cable.
Details the definition and description of DIP switches for slave and host settings.
Provides examples for setting DIP switches for parallel operation of multiple battery units.
Provides instructions for starting the battery system after electrical installation.
Describes main alarms and their countermeasures that affect system output.
Details minor alarms and their countermeasures that do not affect system output.
Analyzes common fault phenomena, their reasons, and solutions.
General| Nominal Voltage | 51.2V |
|---|---|
| Nominal Capacity | 100Ah |
| Energy | 5.12kWh |
| Operating Voltage Range | 44.8V - 57.6V |
| Communication | RS485/CAN |
| Warranty | 10 years |
| Scalability | Up to 16 units in parallel |
| Voltage | 51.2V |
| Model | LFP 5kWh/ LV |
| Cycle Life | 6000 cycles |
| Protection | Overcharge, Over-discharge, Over-current, Short circuit, High/Low temperature |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
To Next Page
