Step 3: (Figure A) Attach the saddle (10) to the Saddle Slider (5) and secure, then, slide the Saddle Slider
into the seat post frame (4) securing in the desired position with the Pop Pin Knob (22). To operate the knob
simply use a twisting/pulling motion until the rail is able to move freely. The saddle slider has predrilled
holes in a variety of positions and will lock into place when positioned correctly. Finally, lock the seat post
into the seat tube at a suitable height with the Pop Pin Knob (22).
Figure A Figure B
Step 4: (Figure B) Attach the Handlebar (8) and the Computer Bracket (26) to the Handlebar Slider (7) with
Allen Bolts (28) and Spring Washers (27). Next attach the handlebar slider to the handlebar stem with the
Pop Pin Knob. Connect the Pulse Wire (30) to the Extension Wire (36) before inserting the Handlebar Stem (6)
into the main frame (1). Connect the Computer (9) to the Computer Wire (29) and mount the Computer to
the Computer Bracket (26).
Step 5: Attach the Bottle Cage (33) to the main frame
(1) with the provided Phillips Cage Bolts (31) and Flat
Washer (32).
To Previous Page
Loading...