EasyManua.ls Logo

SunnCamp Motor Buddy - Dismantling and Warranty Information; Dismantling Procedure; Safety Warning: BBQs;Gas Appliances; Warranty Details

SunnCamp Motor Buddy
3 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
been damaged (tie points or suspension points
for example). Seam sealant is available from
your SunnCamp stockist.
DISMANTLING
To dismantle the awning, simply reverse the
erection procedure. Do make sure that the
entrance is left open to allow air to escape
when rolling the flysheet up. All poles must be
dismantled and the tent should be carefully
rolled prior to placing back in the carry/storage
bag.
SAFETY WARNING: BBQ’S/GAS
APPLIANCES
Your awning has a sewn in label warning
against CARBON MONOXIDE POISONING.
Please be aware of carbon monoxide poisoning
and do not under any circumstances use or
leave a used BBQ (even if you think it is still not
burning) in your awning or tent.
WARRANTY
Please refer to the separate warranty sheet that
is enclosed with your Tent/Awning.

Related product manuals