To Next PageTo Next PageWhy does my Sunny Health & Fitness Exercise Bike make a squeaking noise?
If the Sunny Health & Fitness Exercise Bike is making a squeaking noise, it might be due to loose bolts. Inspect all bolts and tighten any that have become loose.
How to fix no display on Sunny Health & Fitness Exercise Bike computer?
If there is no display on the computer of your Sunny Health & Fitness Exercise Bike, try the following: 1. Remove the computer and check that the wire from it is properly connected to the wire from the handlebar post. 2. Make sure the batteries are correctly positioned and the battery springs are making proper contact. 3. Replace the batteries with new ones, as the current batteries may be unresponsive.
What to do if Sunny Health & Fitness Exercise Bike wobbles?
If your Sunny Health & Fitness Exercise Bike wobbles during use, turn the adjustable end caps on the front and rear stabilizers as needed to level the bike.
What to do if my Sunny Health & Fitness Elite Interactive elliptical bike wobbles?
If your Sunny Health & Fitness Fitness Equipment elliptical bike wobbles during use, turn the adjustable end caps on the front and rear stabilizers as needed to level the bike.
General| Type | Treadmill |
|---|---|
| Bluetooth Connectivity | Yes |
| Heart Rate Monitor | Yes |
| Foldable | Yes |
| Adjustable Seat | No |
| Drive Mechanism | Belt |
| Power Source | Electric |
Unscrew screws and remove washers and tubes from the main frame. Save parts for future use.
Attach front and rear stabilizers to the main frame using bolts and washers. Tighten securely.
Remove hardware, attach tension control wire, sensor wires, and front post. Tighten securely.
Attach decorative covers to the main frame using screws and a spanner. Tighten and secure.
Attach swing rods to front post, foot bars to cranks, and foot bar covers. Tighten securely.
Attach pedals and foot bar covers to foot bars. Tighten using spanner.
Attach handlebars to swing rods and secure with bolts, washers, and nuts. Tighten securely.
Attach swing rod covers to swing rods by hand. Ensure they are fitted properly.
Attach middle handlebar to front post with bolts and spring washers. Tighten. Attach clamp cover.
Remove computer screws, connect sensor and computer wires, insert pulse wire. Attach computer to front post.
Attach bottle holder to front post with screws. Tighten and secure. Assembly is complete.
Instructions for installing, replacing, and disposing of batteries for the exercise computer.
Guide for moving the bike, adjusting balance for stability, and adjusting tension for resistance.
Instructions for cleaning the elliptical bike and proper storage in a dry environment.
Covers button functions, setting time, date, targets (TIME, DISTANCE, CALORIES, PULSE), and body fat measurement.
Details on SCAN, TIME, RPM, SPEED, DISTANCE, CALORIES, PULSE displays and their functions.
Information on CALENDAR, CLOCK, TEMPERATURE display, operational notes, and battery specs.
