How to fix Sunpentown SD-6502SS that won't start?
If your Sunpentown Dishwasher won't start, here are a few things to check: * Ensure the door is completely shut and latched. * Verify that the power supply is properly connected. * If the Delay Start option is selected, refer to the manual on how to reset it. * If the Child Lock is activated, deactivate it by referring to the child lock section in the manual.
What to do if Sunpentown SD-6502SS is not cleaning dishes properly?
If your Sunpentown Dishwasher isn't cleaning dishes well enough, consider the following: * Ensure that the water pressure is normal when using the dishwasher. * Confirm the dishwasher is connected to the hot water supply, and avoid using hot water elsewhere in the house while the dishwasher is running. * Reload the dishes according to the manual's instructions, and use fresh detergent, adjusting the amount based on water hardness and the selected cycle. * Select a more suitable cycle for the level of food soil. * Check that the spray arms can rotate freely without being blocked by any items.
Why are my dishes not drying in Sunpentown SD-6502SS Dishwasher?
If your Sunpentown Dishwasher isn't drying dishes adequately, here's what you can do: * Make sure the rinse aid dispenser is full; add more rinse aid if necessary. * Reload the dishes according to the manual's instructions. * Ensure you've selected a cycle that includes a drying function.
How to remove spots from dishes in Sunpentown Dishwasher?
If your Sunpentown Dishwasher is leaving spots and film on dishes, consider these solutions: * If your water is very hard, consider installing a water softener. * Reload the dishes according to the manual's instructions. * Make sure you are using fresh rinse aid, not old or damp powder. * Refill the rinse aid dispenser if it's empty.
Why does Sunpentown SD-6502SS operate too long?
Your Sunpentown Dishwasher may operate for an extended period due to several reasons: * If the dishwasher is connected to cold water, ensure it's connected to the hot water supply. * The cycle time automatically increases for heavy soil when using the auto, normal, or Heavy Wash cycle. * Selecting the sanitize option increases the cycle time to meet the required sanitization temperature.
What to do if detergent is left in Sunpentown Dishwasher dispenser?
If you find detergent left in the dispenser cup of your Sunpentown Dishwasher, try these steps: * Ensure you're using fresh detergent, as old detergent may not dissolve properly. * Check that the spray arms are not blocked, and reload the dishes to ensure they can rotate freely.
Why is my Sunpentown SD-6502SS Dishwasher causing etching on dishes?
Etching on dishes in your Sunpentown Dishwasher can be caused by: * Using too much detergent, especially if you have soft water; use less detergent. * The inlet water temperature being too high; lower the inlet water temperature if it exceeds 150 ?.
What does Rinse Aid light mean on Sunpentown SD-6502SS Dishwasher?
If the Rinse Aid light is on in your Sunpentown Dishwasher, it means the rinse aid level is low. Simply add more rinse aid.
General| Capacity | 6 place settings |
|---|---|
| Color | Stainless Steel |
| Control Type | Electronic |
| Number of Wash Cycles | 6 |
| Water Consumption | 3.5 gallons per cycle |
| Voltage | 120V |
| Frequency | 60 Hz |
| Energy Star Certified | Yes |
To Next Page
