SunPower SPR-E19-410-COM User Manual

Safety and Installation Instructions
United States and Canada
This document applies to all SunPower modules
listed in Table 1.
Contents of this manual are subject to change without notice.
For the latest US & Canada manual please refer to www.sunpower.com/PVInstallGuideUS
SunPower Corporation
www.sunpower.com
For the latest for Europe, Asia, Australia, Latin America and Africa manual please refer to
www.sunpower.com/PVInstallGuideIEC
For the latest US & Canada technical specifications please refer to
www.sunpower.com/PVResidentialSTS (for residential modules)
www.sunpower.com/PVCommericalSTS (for commercial and utility modules)
Document 001-14158 Rev AG
P/N 100345
P/N 518350
This document includes references to SunPower E-Series, X-Series, P-Series, A-
Series, MAX2, MAX3 and NE modules. These modules do not have grounding
restrictions and all are compatible with high-efficiency transformerless
inverters.

SunPower SPR-E19-410-COM Specifications

General

Brand	SunPower
Model	SPR-E19-410-COM
Category	Inverter
Language	English

Summary

Introduction to SunPower PV Modules

Disclaimer of Liability

Details SunPower's limited liability for product installation, handling, and use.

Underwriters Laboratories (UL) Listing Information

Specifies UL listing compliance for SunPower PV modules and installation requirements.

Limited Warranty Conditions

Outlines conditions under which SunPower's limited warranties for PV modules do not apply.

Safety Precautions for SunPower Modules

Module Fire Rating

Details the fire rating classification for SunPower modules per UL standards.

Electrical Characteristics of SunPower Modules

Electrical Connections and System Monitoring

Equipment Grounding Procedures

Provides essential information and methods for grounding SunPower PV modules for electrical safety.

System Grounding Guidelines

Explains proper grounding techniques for SunPower modules according to NEC and local codes.

Series Connection of Modules

Describes how to wire modules in series to achieve desired voltage output, with limits.

Parallel Connection of Modules

Details parallel wiring for current output, including fusing requirements.

NEC 2017 Rapid Shutdown Compliance

Covers compliance with NEC 2017 rapid shutdown requirements for modules with MLSD.

SunPower Module Mounting

Site Considerations for Module Mounting

Defines environmental and site requirements for safe and effective SunPower module mounting.

Module Mounting Configurations

Details various methods and configurations for mounting SunPower modules, including frame compatibility.

Excluded Operating Environments

Identifies specific operating environments excluded from the SunPower Limited Warranty.

Module Handling Procedures

Provides guidelines for safe handling of SunPower modules to prevent damage and ensure longevity.

Maintenance and Cleaning of SunPower Modules