WARNING! Always perform the entire pre-ride checklist before using the scooter as this can
help you spot problems that could interfere with safe scooter operation. Failure to follow this
entire checklist before every ride can cause death, serious injury, and/or property damage
to yourself and/or others.
Pre-Ride Checklist06
DESIGNED BY MIKU TEAM
DESIGNED BY MIKU TEAM
09/10
Step : Fasten mirrors on the fixing holes
at steering bar and tighten with a wrench.
Step : Adjust mirrors in proper position.
You can prepare for your first riding after simple 2-step assembly.
FAST ASSEMBLY
05
1 2
Headlight
Turn signals
Footstep
Side stand
1685mm
1065mm
780mm
Mirror
Left switch
Right switch
Ignition switch
Throttle grip
Rear brake lever
Dashboard
Front brake lever
Storage case
Battery case
To Next Page
Loading...