Need help?Do you have a question about the Sunrain BYC-007TF1 and is the answer not in the manual?
Specifies power supply, ambient, and water temperature limits for safe operation.
Critical safety warnings regarding installation, grounding, operation, and maintenance.
Explains how heat pumps collect and transfer energy from outside air to pool water.
Illustrates the refrigerant cycle and components of an air source heat pump.
Lists locations and conditions to avoid for proper unit installation.
Essential checks before installation, including space, base, and electrical supply.
Specifies required clearance around the unit for optimal operation and maintenance.
Provides detailed physical dimensions for various heat pump models.
Illustrates the correct installation base setup and provides instructions for safely lifting the unit.
Important points to consider before and during pipeline installation to prevent issues.
Details on pipeline installation, including symbols, diagrams, and connection sizes.
Details acceptable water quality parameters and testing requirements for the system.
Guidance on selecting the appropriate circulation water pump and water pipes.
General guidelines for electrical wiring, connections, and grounding.
Details wiring specifications and circulation pump connection for different models.
Illustrates the circulation pump connection with an external A.C. contactor.
Provides a detailed electrical schematic and explains wire color codes.
Describes the function of each button and the elements displayed on the wire controller.
How to start, lock/unlock the controller, and select operating modes (ECO, Boost, Cooling, Auto).
Guides users on setting the desired water temperature and configuring the unit's clock.
Instructions for setting timers, understanding various icons, and recovering factory settings.
How to access and view the unit's operational parameters.
How to adjust specific operational parameters like inlet water temperature and temp difference.
Important considerations before initiating operation and adjustment.
A checklist for system preparation and the adjustment process.
Recommends professional maintenance, checking refrigerant levels, and leak detection.
Step-by-step guide for safely removing the compressor from the unit.
Guidelines for regular maintenance, fire safety, and handling unit malfunctions.
Analyzes causes and solutions for high/low discharge and suction pressure issues.
Addresses compressor shutdown causes like high pressure, overload, thermostat, or low voltage.
Analyzes causes for excessive compressor noise and failure to start.
Details heating, cooling capacity, power input, COP, and EER for different models.
Lists compressor type, refrigerant, temperature ranges, noise levels, and materials.
Covers dimensions, weight, power supply, and water proof level for each model.
Instructions for contacting the service center for operational issues.
To Next Page
General
