Need help?Do you have a question about the Sunrain BYC-010TF1 and is the answer not in the manual?
Ensures installation by professionals and proper grounding for electrical safety.
Covers ventilation, finger protection, handling burning smells, and qualified personnel.
Details power supply, ambient temperature, and working water temperature limits.
Emphasizes professional installation, proper grounding, and ventilation for safety.
Covers protecting fingers, handling burning smells, qualified repairs, and flammable sources.
Lists locations to avoid for installation, such as near corrosive gases or flammable items.
Checks for model correctness, sufficient space, dry/ventilated location, and proper base.
Diagram showing required clearances around the unit for operation and maintenance.
Details acceptable PH, hardness, conductivity, and ion concentrations for optimal operation.
Guidance on selecting a circulation pump, including head calculation and wiring notes.
Emphasizes dedicated power supply, grounding, professional wiring, and cable management for safety.
Provides the complete electrical schematic for the heat pump system and its components.
Troubleshooting high and low discharge pressure causes and solutions.
Diagnosing and resolving high and low suction pressure faults.
Covers compressor stopping due to high pressure, overload, thermostat, or low voltage.
Addresses high compressor noise and failure to start, including control circuit issues.
To Next Page
General
