Need help?Do you have a question about the Sunricher Azoula AZ220614A and is the answer not in the manual?
Log in to the Azoula Smart Hub using a local network connection.
Log in to the Azoula Smart Hub from outside the local network.
Add sub-devices to the Azoula Smart Hub using the mobile application.
Add sub-devices to the Azoula Smart Hub using the physical button on the gateway.
Understanding how sub-devices with multiple endpoints are displayed and managed.
Create and configure virtual zones or rooms for organizing devices.
Modify existing zones by adding or removing sub-devices.
Remove a previously created zone from the application.
Control devices collectively or individually within a defined zone.
Set up custom lighting effects or device states for specific scenarios.
Activate saved scenes to restore pre-configured device states.
Modify existing scenes by adding, removing, or deleting devices.
Set up automated device actions based on triggers and conditions.
Modify or delete existing automation rules and their parameters.
Create automations utilizing specific devices like Green Power Switches or Sensors.
Create sequences of actions for batch device control, like a scrolling light effect.
Understand the distinctions between Quick Control, Scenes, and Zones for device management.
Perform Over-The-Air updates for the Azoula Smart Hub gateway.
Update the firmware for sub-devices connected to the gateway.
Integrate the Azoula Smart Hub with Apple HomeKit for control via the Home app.
Add sub-devices to the Home app via the gateway or Azoula Smart app.
Remove sub-devices from the Home app via the gateway or Azoula Smart app.
Remove the Azoula Smart Hub gateway from the Home app.
To Next Page
General