Sunsea AIoT SIMCom A7670E KIT - Page 8

A7670E_TEKIT_User Guide_V1.00
www.simcom.com
8
/
13
Figure 2: TE Bottom View
Attachment Label
Description
T1
Module
T2
Main Antenna Connector
T4
Micro USB Connector
T5
Micro USB Connector
T6*
UART Switch
T7
SIM Card Holder
T8
Test Point
B1
Connector (Connect to SIMCOM-EVB)
B2
Connector (Connect to SIMCOM-EVB)
If UART Switch connected to above two pins by jumper，the debug UART will connect to EVB;
If UART Switch connected to below two pins by jumper，the UART3 will connect to EVB.
NOTE