Start on the unit
Do not start the unit until it has been completely assembled. Before switching on the unit,
always check the oil.
Check before use!
Check the safe condition of the device:
– Check the device for leaks.
– Check the device for visual defects.
– Check that all parts of the device have been securely fitted.
-Check that all safety devices are in proper condition.
Once the machine has been set up properly, start the engine as follow:
1. Press the fuel pump 10 times.
2. Turn the engine switch to the ON position.
Do not operate the device unless you did not find any faults. If a part has become
defective, make sure to replace it before you use the device again.
Danger of injury!
Before starting work, always check the ground and remove all objects
which could be thrown by the device.
13
ON
To Next Page