Sunshine Tech Smart Touch Light Switch - Page 15

Step 2: Connect to the control device
• Connect the two wires of device 1 (control device) to pins OUT1 and N of Smart Touch Light
Switch.
• Connect the 2 wires of device 2 (control device) to pins OUT2 and N of Smart Touch Light Switch.
• Connect the 2 wires of device 3 (control device) to pins OUT3 and N of Smart Touch Light Switch.
• Connect the 2 wires of device 4 (control device) to the OUT4 and N pins of the Smart Touch Light
Switch.

This is a product with 4 control outputs, so it is recommended to use only 4
devices (Example: One output should only control air conditioner or fan, or lamp,.
..)

If any problems occurred during installation, please do not disassemble the
components.
User Manual