5
Handling Bluetooth
Press shortly the key MODE to switch into Bluetooth if the speaker is in Line In
mode. The Bluetooth works spontaneously and searches previous Bluetooth
set. If the speaker fails to link, it starts pairing other Bluetooth devices. In this
case, turn on your Bluetooth device to search “SPUBT700”. The PIN code is
“0000”. Music streams after pairing successfully. Should you receive a call, you
can press the key “
” to answer the phone. When the call finishes, you can
press the key “
” to end. When users turn on the speaker without plugging
TF/SD Card, U-disk or 3.5mm Line In cable, it enters into Bluetooth Mode
automatically.
Charging
Plug the charging cable into Micro USB slot of the speaker, USB slot of PC or
other USB slot of chargers to get charged. When the speaker is being charged,
the indicator light turns red. Once it if fully charged, the indicator light turns
off. (We’d suggest the user turn off the speaker while charging. It takes much
longer to reach a complete charger if the speaker is being used.
To Next Page
Loading...
