Page 8
LIGHTING THE GRILL
Ensure Burner Control Knobs
are In the “OFF” position,
Turn Knob to High Position.
2. Push in Black Push Button Igniter
located above the Gas Knob on each side
of grill.
3. You will hear a loud click as the
electronic lighter produces a spark.
Listen for the sound of the gas igniting
and look for a flame through the cooking
grids. If the burner does not light on the
first try, repeat immediately.
4. If the burner does not light in 5
seconds then wait five minutes until the
gas clears before attempting to light it
again. Repeat the procedure or try the
manual lighting procedure below.
WARNING:
When Lighting the Grill, continue to rapidly press the Black Igniter Button In & Out while allowing the Gas to Flow, if
you Do Not hear a Clicking Sound, immediately turn the gas OFF – otherwise gas will continue to flow.
5. Upon successful lighting, repeat the
process on the other burners you wish to
light.
6. To shut off the burners, rotate the
knob and turn to OFF.
7. It is normal to hear a popping sound
when the burners are turned off.
Lighting Time 3 to 5 minutes
1. Stack charcoal briquettes or wood into
a pyramid-shaped pile on top of the
charcoal grate or pan. We recommend
using 2 pounds (approximately 30
briquettes) to start your fire, adding
more as needed. – CLOSE DRAWER -
To Next Page
Loading...