Sunsystem SWP Series - Product Description; Insulation and Outer Casing; Water Tank Construction; Electric Heating Element Option

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
5
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
2. DESCRIPTON
Water heaters for heat pump systems
SWP series includes:
SWP NL one coil water heater
SWP N one coil water heater
SWP 2N double coil water heater
With extra-sized heat exchanger surface;
suitable for solar water heang, space-
heang,andheatpump
systems with large number of consumers
Product features:
• Floor standing
• Vercalmodicaons
• High efficiency insulation and outer
casing of PVC
• Complex corrosion protection realized
by means of titanium enamel and anode
protection.
• All threads are internal.
• Convenient inspection opening.
• High efficiency heat exchanger coil/coils
(SWP N/SWP 2N).
The height of SWP NL model is
compensated by its smaller diameter; heat
exchanger coil with increased surface.
• Easy installation.
• Suitableforsolarwaterheating,space-
heating,andheatpump
systems with large number of consumers
2.1. High eciency insulaon and outer
casing
The quality of the insulaon of a
water heater is a key factor for its heat
conservaoncapabilityandenergy
eciency.
All water heaters SWP series have a high
eciency insulaon (DIN 4753, part 8)
and outer casing of PVC with RAL 9006.
2.2. Water tank
Water tank is made of low-carbon steel
S235JR,ghtlycoveredwithtanium
enamel on the inside. It is then baked to
produceasmoothanduniformdeposion
- free glazing. Thus the domesc hot
waterremainsclean,andthewatertankis
protected against corrosion.
All threads are internal (see technical
parameters).
2.3. Electric heang element (opon).
Outlet connection of electric heating
element 1 ½“ :
3000W/230V; 4500W/230V;
6000W/230V;7500W/400V.