SUNTEC KLIMATRONIC DryFix 20 MAX

Questions and Answers

A
Amanda TaylorAug 15, 2025
What to do if my SUNTEC Kitchen Appliances unit does not work?
- A
  aliciadonaldsonAug 15, 2025
  First, ensure the SUNTEC Kitchen Appliance is properly plugged into a working outlet. Check that the ambient temperature is between 5 - 35°C. Also, verify if the 'tank full' indicator is lit, indicating a full or misplaced water tank; if so, empty the tank and reposition it correctly. Finally, the unit might be in defrost mode, which is a normal process. The unit will return to normal operation once defrosting is complete.
S
simmonsbaileyAug 18, 2025
Why is my SUNTEC KLIMATRONIC DryFix 20 MAX Kitchen Appliances device not dehumidifying?
- T
  Tommy NguyenAug 18, 2025
  Check the air inlet and outlet of your SUNTEC Kitchen Appliances for any obstructions and remove them. Also, ensure that the set humidity on the unit is not below the ambient humidity or 20%, as this will cause the unit to stop dehumidifying.
C
Christopher SmithAug 21, 2025
How to fix SUNTEC KLIMATRONIC DryFix 20 MAX Kitchen Appliances when the air does not flow out?
- F
  Fernando Palmer DVMAug 21, 2025
  If air is not flowing out of your SUNTEC Kitchen Appliances, first check if the air filter is dirty and clean it as described in the manual. Also, inspect the air inlet and outlet for any blockages and remove any obstructing objects.
R
Ryan BenjaminAug 25, 2025
Why my SUNTEC KLIMATRONIC DryFix 20 MAX Kitchen Appliances makes loud noises during start up?
- S
  schultzlynnAug 26, 2025
  If your SUNTEC Kitchen Appliances is making loud noises during start up, make sure the unit is placed on a stable, flat surface. Also, check if the air filter is dirty and clean it as described in the manual.
V
vhowardAug 28, 2025
Why is hot air coming from the air outlet of my SUNTEC KLIMATRONIC DryFix 20 MAX?
- P
  Peter FuentesAug 28, 2025
  The dehumidifier has no cooling function; the air comes out of the condenser. This is not a defect.
S
sloweAug 31, 2025
What does error code CH mean on SUNTEC KLIMATRONIC DryFix 20 MAX?
- S
  scottwadeAug 31, 2025
  When Error Code CH appears, it means the room temperature is above 35°C. The compressor switches off under this condition, but the fan continues to run.
L
Lisa Gill MDSep 3, 2025
What does error code CL mean on SUNTEC KLIMATRONIC DryFix 20 MAX?
- D
  Dr. Stephen JoyceSep 3, 2025
  Error Code CL indicates that the room temperature is below 5° C. The compressor switches off under this condition, but the fan continues to run.
S
Sean HutchinsonSep 7, 2025
What does error code HI mean on SUNTEC KLIMATRONIC DryFix 20 MAX?
- G
  gwalkerSep 7, 2025
  When Error Code HI is displayed, it means the relative humidity in the room is above 90%. The compressor and fan continue to run under this condition.
B
Belinda BowmanSep 12, 2025
What does error code LO mean on SUNTEC KLIMATRONIC DryFix 20 MAX?
- W
  williamsgeoffreySep 12, 2025
  Error Code LO indicates that the relative humidity in the room is below 20%. The compressor switches off under this condition, but the fan continues to run.