SUNTERRA, L.L.C. 1.866.866.4486 www.sunterrausa.com
02
]
ENGLISH
3000 GPH PUMP - 203000
4300 GPH PUMP - 204000
01. Front cover 04. Carrying handle
02. Turbine cover 05. Housing assembly
03. Turbine 06. Cable and plug
INSTALLATION
How to Install: Place your pump on top of a flat brick or stone at the bottom of your
water garden. Elevating the pump off of the basin bottom will help prevent debris from
interfering with the pump’s performance.To test performance, completely submerge
the pump under water and plug into a GFCI outlet.When your pump is working
properly, you will hear a low humming sound and water will be circulating out of
the top outlet. If you do not hear the humming sound or experience performance
problems, please read the troubleshooting tips and care instructions in this guide.
Note:When attaching an adapter, fountain nozzle or other accessory to the pump, use
plumber’s tape at the connection points for a tight fit.
Note:The 3000 and 4300 GPH pumps are not recommended for use with water
accent attac
hments.
To Next Page
Loading...