EasyManua.ls Logo

Suntime Havana Duo Seat - User Manual

Suntime Havana Duo Seat
3 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Havana Duo Seat Instructions (LALC133)
Congratulations on your new purchase. Before assembly please refer to the parts list
below to ensure all parts are correct.
Please retain for future use.
Warnings:
This product is not for commercial use
Keep children away during assembly. This item contains small parts which
can be swallowed by children.
Parts List:
Assembly Guide
Please follow the diagram shown in section I. Please assemble both bar D or E across
frame A. Please adjust and ensure the length of bar D and E can be initially fitted to
frame A before assembly, the following the below instruction:
i) Please insert the short side of the Alley Key (Part J) into the hole located
in the middle of the bar.
ii) Make approx. half a turn in a clockwise position, and remove the Allen
Key from the hole.
iii) Repeat step i) and ii) until the bar has been extended to a tight position.
iv) Repeat step i) and ii) however in a counter-clockwise position when
disassembling part D.
Both seat frames then should be assembled onto frame B. Please find the diagram in
section I for the screw locations on frame B.
Two pieces of frame C are to be secured in both side of frame B. Please locate the
screw locations in the diagram below.
Question and Answer IconNeed help?

Do you have a question about the Suntime Havana Duo Seat and is the answer not in the manual?

Summary

Product Warnings and Safety

General Safety Precautions

Keep children away during assembly as the product contains small, swallowable parts.

Parts Identification

Assembly Instructions

Attaching Bars to Frame

Assemble bars D or E to frame A, adjusting for a tight fit using the Alley Key.

Connecting Seat Frames

Assemble both seat frames onto frame B, locating screw points as per diagram.

Securing Side Frames

Secure two pieces of frame C to both sides of frame B using specified screw locations.

Final Assembly Steps

Connect part G to F with screw M, then connect this assembly to part B with screw L.

Installing Glass Tops

Place glass top H on the upper part and glass top I on the lower part of the glass frame.

Spare Parts Availability

Suntime Havana Duo Seat Specifications

General IconGeneral
MaterialRattan
Frame MaterialSteel
Seating Capacity2
Cushion IncludedYes
Assembly RequiredYes
Weight Capacity220 kg

Related product manuals