Suntime LYSC07 - Double Glider Assembly Guide; Attach Parts S to E and E1; Attach Parts T to U and D to U; Connect Assembled Parts to Base Frame

２
Assembly Guide:
I) Attach parts S to parts E and E1 using bolts #V
II) Attach parts T to part U, use screws W, repeat until 2 sections completed.
Attach part D to part U
III) Attach assembled parts to the base frame, use bolts R and add parts K and L
These should now swing freely on the base frame.
IV) Build seat section by attaching arms to cross bars, attach G and F bars to the arm using
bolts I