What to do if Sunwave Remote Control won't operate a device?
If your Sunwave remote control isn't operating a device, make sure the correct DEVICE KEY is selected. Also, try moving closer to the device, ensuring there are no obstructions and that you're aiming directly at it. Finally, verify the programming with the learning function or manufacturer codes was done correctly.
How to fix unsuccessful IR learning on Sunwave Remote Control?
If the IR learning process is not successful on your Sunwave remote control, try the following: replace the batteries in both the remote and the target device's remote, keep the remotes 2-4 inches apart, and avoid using the learning function near an incandescent lamp. If the learning process completes without errors but you still can’t control your devices, repeat the learning procedure.
General| Brand | Sunwave |
|---|---|
| Model | SRC-3060 |
| Category | Remote Control |
| Language | English |
To Next Page
