19
Cleaning and Maintenance
1,Unplug the unit before cleaning.
2, Any greasy dirt on the fan and fan blade should be cleaned with
clean and mild detergent and soft cloth.
3, Please put some engine oil between motor shaft and bearing
before using every time.
4. Please clean the ultrasonic-humidifier (when some lime dirt on
it, normally once per week) by using a clean soft cloth to remove.
Remark:
*Clean the greasy dirt which would cause some discolor and
broken.
Please pay attention when clean:
2. Please don’t wash it with water directly.
2. Please don’t use with any Chemical sources like diluent and
olein to wipe that will make some damage for the product.
* Assemble the unit properly after cleaning.
*Putting the product in the dry place when not using.
2.Water tank is not
cleaned
8.Others 1.Burning smell
comes out from
motor
2.Isolation of the
machine is damaged
3.Over heat situation
happen to motor
4.Motor cover or hoop
net is damaged
1.Stop using and send to
maintenance
2. Stop using and send to
maintenance
3.Stop using for a while and
use it later
4. Only use it after parts’ been
changed.
To Next Page
Loading...