80
FX-301
FD-H35-M2
FD-H35-M2S6
FD-H20-M1
FD-H35-20S
FD-H20-21
FD-H30-L32
FD-H18-L31
FD-H13-FM2
FD-6V
36 1.417
18 0.709
12 0.472
22 0.866
11 0.433
7 0.276
36 1.417
18 0.709
12 0.472
20 0.787
11 0.433
7 0.276
26 1.024
13 0.512
9 0.354
20 0.787
10 0.394
7 0.276
12 0.472
6 0.236
4 0.157
20 0.787
10 0.394
7 0.276
20 0.787
11 0.433
7 0.276
14 0.551
7 0.276
4 0.157
"0.02 mm
"0.0008 in
gold wire
"0.02 mm
"0.0008 in
gold wire
"0.02 mm
"0.0008 in
gold wire
"0.02 mm
"0.0008 in
gold wire
"0.02 mm
"0.0008 in
gold wire
"0.02 mm
"0.0008 in
gold wire
LIST OF FIBERS
Environment resistant
Heat-resistant
Vacuum
Environment resistant fibers (Reflective type)
:LONG
:STD
:FAST
:S-D
Sensing range (mm in) (Note 1, 2)
Red LED
Blue LED
Green LED
Infrared LED
270 10.630
140 5.512
100 3.937
47 1.850
160 6.299
80 3.150
57 2.244
26 1.024
270 10.630
140 5.512
100 3.937
47 1.850
0 to 15 0 to 0.591
0 to 10 0 to 0.394
1 to 8 0.039 to 0.315
2 to 6 0.079 to 0.236
310 12.205
140 5.512
47 1.850
165 6.496
75 2.953
100 3.937
52 2.047
26 1.024
140 5.512
70 2.756
45 1.772
80 3.150
40 1.575
28 1.102
140 5.512
70 2.756
45 1.772
25 0.984
12 0.472
8 0.315
21 0.827
10 0.394
6 0.236
Notes: 1)
The sensing range is specified for white non-glossy paper [400400 mm 15.74815.748 in (FD-H30-L32, FD-H18-L31: glass substrate 5050 mm 1.9691.969 in)] as the object.
Notes: 2)
Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared
type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.
Notes: 3) The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing
object size if using amplifiers other than red LED type. Also, note that the corresponding setting distance is different from the rated sensing distance.
350 C 662 F Coaxial
200 C 392 F Coaxial
200 C 392 F Coaxial
130 C 266 F
350 C 662 F Sleeve 60 mm 2.362 in
350 C 662 F Sleeve 90 mm 3.543 in
R25 mm
R0.984 in
R25 mm
R0.984 in
R25 mm
R0.984 in
R25 mm
R0
.984 in
R25 mm
R0.984 in
R200 mm
R7.874 in
2 m
6.562 ft
1 m
3,281 ft
1 m
3,281 ft
1 m
3,281 ft
Allowable
bending
radius
Model No.
The vacuum type fiber must be used with the following products as a set.
FT-J6: Fiber at atmospheric side (one pair set)
FV-BR1: Photo-terminal (one pair set)
300 C 572 F Glass substrate detection
Fixed-focus reflective type
W19
H27
D5
W0.748
H1.063
D0.197
180 C 356 F Glass substrate detection
Fixed-focus reflective type
W19
H27
D5
W0.748
H1.063
D0.197
Type
Shape of fiber head
(mm in)
2 m
6.562 ft
1 m
3,281 ft
Semi-standard fibers (Custom made per order)
The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length
(symbol f ) from the table below.
Accessories (attached with fibers)
FD-FM
FD-FM -S f
FD-NFM2-S f
FD-H20-M
FD-H35-M
3 9.843, 4 13.123, 5 16.404,
10 32.808, 15 49.213, 20 65.617
2 6.562 (Note), 3 9.843, 4 13.123,
5 16.404, 10 32.808, 15 49.213,
20 65.617
2 6.562, 3 9.843
3 9.843
Standard threaded
head (free-cut)
With sleeve
Small diameter
threaded head with
sleeve (free-cut)
200C 392F heat-resistant
350C 662F heat-resistant
Correlation between sensing
range attenuation coefficient and
fiber cable length
The longer the fiber cable, the
shorter the sensing range.
1 0.394, 2 0.787, 3 1.181, 4 1.575,
5 1.969, 6 2.362, 7 2.756, 8 3.150,
9 3.543, 10 3.937, 11 4.331, 12 4.724
1 0.394, 2 0.787, 3 1.181, 4 1.575,
5 1.969, 6 2.362, 7 2.756, 8 3.150,
9 3.543, 10 3.937, 11 4.331, 12 4.724
Note:
The standard fiber has a 2 m 6.562 ft fiber cable length and a 4 cm 1.575 in or 9 cm 3.543 in sleeve length.
Fiber cutter
• FX-CT2
Fiber attachment
• FX-AT2
(for fixed-length fiber)
• FX-AT3
for "2.2 mm
"0.087 in fiber
• FX-AT4
(for "1 mm "0.039 in fiber)
• FX-AT5
(for "1.3 mm "0.051 in fiber)
• FX-AT6
for "1 mm "0.039 in and "1.3 mm
"0.051 in mixed fiber
Fiber cable length
(Unit: m ft)
f
Sleeve length
(Unit: cm in)
Min. sensing object
at the maximum
sensitivity (Note 3)
Type
Basic model No.
()
(
)
2 m
6.562 ft
2 m
6.562 ft
Notes: 1)
Fiber cutter is not supplied as accessory along with FT-NB8, FT-N8, FD-N8 and FD-N4. Please order it separately.
Notes: 2)
The fiber attachment is not attached with FT-N8/NB8/P80 and FD-N8/P80. The previous FX-AT10 attachment is attached with FD-N4.
Fiber cable
length
:
Free-cut
R10 mm
R0.394 in
Fiber
R25 mm
R0.984 in
Sleeve
R10 mm
R0.394 in
Fiber
R25 mm
R0.984 in
Sleeve
To Next Page
Loading...
