Sunx FX-301 - Fiber Cutter; Fx-At2; Protective Tube; Fiber Bender

121
FX-301
DIMENSIONS (Unit: mm in)
16
0.630
MS-EX-3
FTP-
FDP-
Mounting bracket
for FD-WKZ1
FB-1
FX-CT2 FX-AT2
FX-AT3 FX-AT4
FX-AT5 FX-AT6
Mounting bracket for FX-MR2
(Accessory for FX-MR2)
Material: Brass (Nickel plated)
Material: SPCC-SD (Zinc chromate plated)
FX-CT2 is not attached
with the FT-NB8/N8/P80
or the FD-N8/N4/P80
FX-AT4 is not
attached with
the FD-N4
FX-AT3 is not attached
with the FT-NB8/N8/P80,
FD-N8/P80
Protective tube (Optional)
FTP-, FDP-N
FDP-N
FTP-N
Material: ABS
A conventional FX-CT1 fiber
cutter is attached with the
FT-P80 and the FD-P80.
Material: Polycarbonate
Material: PP (Containing steel blade)
Material: POM
Materials: Holder ..........PA (Nylon66)
Ground ........POM
Materials: Holder ..........PA (Nylon66)
Ground ........POM
Materials: Holder ..........PA (Nylon66)
Ground ........POM
Model No.
FTP-500, FTP-N500, FDP-N500, FDP-500
FTP-1000, FTP-N1000, FDP-N1000, FDP-1000
FTP-1500, FTP-N1500, FDP-N1500, FDP-1500
Length L (mm in)
500 19.685
1,000 39.37
1,500 59.055

10
0
10
0
10
0
0.394
0
0.394
0
0.394
0
Accessory for FD-WKZ1
Fiber bender (Optional)
Fiber cutter (Accessory for free-cut type fiber)
Attachment for"2.2 mm "0.087 in fiber (Accessory)
Attachment for "1.3 mm "0.051 in fiber
(Accessory for "1.3 mm "0.051 in fiber)
Attachment for fixed-length fiber
(Accessory for fixed-length fiber)
Attachment for "1 mm "0.039 in fiber
(Accessory for "1 mm "0.039 in fiber)
Attachment for "1 mm / "1.3 mm "0.039 in / "0.051 in mixed fiber
(Accessory for "1 mm / "1.3 mm "0.039 in / "0.051 in fiber)