76
FX-301
100 3.937
50 1.969
35 1.378
44 1.732
22 0.866
14 0.551
100 3.937
50 1.969
35 1.378
72 2.835
36 1.417
26 1.024
320 12.598
160 6.299
120 4.724
160 6.299
80 3.150
50 1.969
120 4.724
60 2.362
35 1.378
100 3.937
50 1.969
30 1.181
36 1.417
18 0.709
12 0.472
50 1.969
25 0.984
18 0.709
22 0.866
11 0.433
7 0.276
50 1.969
25 0.984
18 0.709
32 1.260
16 0.630
10 0.394
160 6.299
80 3.150
60 2.362
160 6.299
80 3.150
50 1.969
80 3.150
40 1.575
25 0.984
46 1.811
23 0.906
16 0.630
18 0.709
9 0.354
6 0.236
"0.04 mm
"0.0016 in
opaque object
"0.02 mm
"0.0008 in
opaque object
"0.04 mm
"0.0016 in
opaque object
"0.06 mm
"0.0024 in
opaque object
"4 mm
"0.157 in
opaque object
"0.08 mm
"0.003 in
opaque object
"0.02 mm
"0.0008 in
opaque object
LIST OF FIBERS
Environment resistant
Heat-resistant
Vacuum
Chemical-resistant
Environment resistant fibers [Thru-beam type (one pair set)]
:LONG
:STD
:FAST
:S-D
Sensing range (mm in) (Note 1)
Red LED
Blue LED
Green LED
Infrared LED
550 21.654
280 11.024
200 7.874
100 3.937
200 7.874
300 11.811
1,000 39.370
1,000 39.370
280 11.024
165 6.496
75 2.953
90 3.543
310 12.205
140 5.512
50 1.969
880 34.646
440 17.323
155 6.102
550 21.654
280 11.024
90 3.543
3,500 137.795
1,500 59.055
530 20.866
470 18.504
230 9.055
80 3.150
220 8.661
100 3.937
35 1.378
800 31.496
400 15.748
140 5.512
3,500 137.795
1,500 59.055
530 20.866
420 16.535
210 8.268
160 6.299
220 8.661
110 4.331
70 2.756
420 16.535
210 8.268
160 6.299
70 2.756
35 1.378
25 0.984
320 12.598
160 6.299
120 4.724
400 15.748
200 7.874
150 5.906
75 2.953
38 1.496
24 0.945
70 2.756
35 1.378
22 0.866
28 1.102
14 0.551
10 0.394
Notes: 1)
Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared
type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.
Notes: 2)
The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red
LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent
condition.
Notes: 3) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted.
Lens mountable
Side-view
350 C 662 F
Lens mountable
200 C 392 F
Lens mountable
130 C 266 F
Lens mountable
Easy mounting Rectangular head
SEMI S2 compliant
W7
H15
D13
W0.276
H0.591
D0.512
350 C 662 F
Sleeve 60 mm 2.362 in
Allows flexible wiring
200 C 392 F
Lens mountable
R25 mm
R0.984 in
R25 mm
R0
.984 in
R25 mm
R
0.984 in
R30 mm
R1.181 in
R200 mm
R7.874 in
R30 mm
R1.181 in
FT-H35-M2
FT-H35-M2S6
FT-H20W-M1
FT-H20W-M2
FT-H20-M1
FT-H13-FM2
FT-L8Y
FT-V8Y
FT-6V
FT-60V
Allowable
bending
radius
Model No.
R10 mm
R0.394 in
R10 mm
R0.394 in
FT-Z802Y
The vacuum type fiber must be used with the following products as a set.
FT-J6: Fiber at atmospheric side (one pair set) FV-BR1: Photo-terminal (one pair set)
Semi-standard fibers (Custom made per order)
The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length
(symbol f ) from the table below.
FT-FM
FT-FM -S f
FT-FM L
FT-NFM2-S f
FT-WA30-
FT-WA8-
FT-A30-
FT-A8-
FT-H20-M
FT-H35-M
FT-Z80 Y
3 9.843, 4 13.123, 5 16.404, 10 32.808,
15 49.213, 20 65.617,25 82.021, 30 98.425
2 6.562 (Note), 3 9.843, 4 13.123, 5 16.404,
10 32.808, 15 49.213, 20 65.617, 25 82.021, 30 98.425
20 65.617, 30 98.425
5 16.404
2 6.562, 3 9.843
3 9.843
5 16.404, 7 22.966
Standard threaded
head (free-cut)
With sleeve
With large diameter lens
Small diameter threaded
head with sleeve (free-cut)
Wide beam
200C 392F heat-resistant
350C 662F heat-resistant
Chemical-resistant
Correlation between sensing
range attenuation coefficient and
fiber cable length
The longer the fiber cable, the shorter the
sensing range.
1 0.394, 2 0.787, 3 1.181, 4 1.575, 5 1.969, 6 2.362,
7 2.756, 8 3.150, 9 3.543, 10 3.937, 11 4.331, 12
4.724
1 0.394, 2 0.787, 3 1.181, 4 1.575, 5 1.969, 6 2.362,
7 2.756, 8 3.150, 9 3.543, 10 3.937, 11 4.331, 12
4.724
Note:
The standard fiber has a 2 m 6.562 ft fiber cable length and a 4 cm 1.575 in or 9 cm 3.543 in sleeve length.
Fiber
R25 mm
R0.984 in
Sleeve
Type
Shape of fiber head
(mm in)
2 m
6.562 ft
1 m
3.281 ft
2 m
6.562 ft
1 m
3.281 ft
1 m
3.281 ft
Type
Fiber cable length
(Unit: m ft)
f
Sleeve length
(Unit: cm in)
Min. sensing object
under the optimum
condition (Note 2)
Basic model No.
2 m
6.562 ft
2 m
6.562 ft
2 m
6.562 ft
(Note 3)
Fiber cable
length
:
Free-cut
To Next Page
Loading...
