Keys x 2
1
OPERATION MANUAL
PARTS LIST
TOOL CHEST
4 DRAWER (660mm/26”)
IMPORTANT:
THIS OPERATING MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ CAREFULLY AND UNDERTAND ALL
INFORMATION BEFORE OPERATING TOOL
CHEST. SAVE THIS MANUAL FOR
FUTURE USE.
TOOLS & ASSISTANCE NEEDED
2 People Lift
TOOL CHEST SPECIFICATIONS
Width Depth Height
Overall 655mm 305mm 363mm
Top Tray 650mm 295mm 49mm
Small Drawers 565mm 268mm 40mm
Deep Drawers 565mm 268mm 52mm
Weight 17.3kg
CAUTION: TAKE SAFETY PRECAUTIONS
WHEN USING YOUR TOOLBOX
5 x EVA Liners
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release
lever while pushing down the
left grey release lever.
• Pull the drawer outward until
it is released from the drawer
slide.
Push up the
right grey release lever
Pull down the
left grey release lever
1
1
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side
of the drawer into the slots on
the slides, being careful that they
are properly positioned.
• Once properly inserted,
completely close the drawer
to set the slides in their proper
positions.
2
MAINTENANCE
MAINTENANCE
• Periodically tighten all hardware
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
STP7524
To Next Page
Need help?
General
