INSTRUCTIONS
DFSTEAMER
Read all instructions carefully before using this steam cleaner.
FEATURES
The high-temperature and high-pressure steam is ideal for de-icing A/C coils.
You can also use the steamer to clear away dirt and stains on the equipment
and surrounding area. The DFSteamer has an automatic heating control, and
is able to generate steam continuously. No chemical agents are needed,
making the DFSteamer environmentally friendly.
SAFETY
Once the boiler is empty, the steamer will turn off. The DFSteamer also has a
built-in safety shutoff valve that will automatically open and release pressure.
SPECIFICATIONS
Input................................... 120 VAC, 60 Hz
Tank Capacity.................... 10.1 fluid ounces
Suggested fill capacity....... 8.5 fluid ounces
Rated Power....................... 900-1050 watts
Steam Pressure................... 40.6 psi
Injected Steam Capacity..... 28 gram/minute
Functioning Temperature... 275°F
Fuser Temperature............. 336.2°F
Dimensions........................ 11.22” x 5.71” x 9.45”
Net weight.......................... 3.53 lbs.
SEALED UNIT PARTS CO., INC.
PO BOX 21, 2230 LANDMARK PLACE
ALLENWOOD, NJ 08720 USA
www.supco.com
SAFETY
1. Do not leave machine unattended.
2. To prevent electrical shock, do not immerse the power cord in liquids.
3. Do not use if power cord or plug is damaged.
4. Always make sure the tank has water before turning the unit on.
5. During operation, the safety cap must be tightened so the tank is sealed.
6. Make sure the steamer is upright when in use. If tilted more than 45°,
boiling water will be sprayed out with the steam.
7. Do not direct steam toward people, animals or electrical products.
8. Before refilling water, unplug the power cord.
9. Always unplug the power cord before cleaning the steamer.
10. Do not add any chemicals to the tank.
11. The filling aperture must not be opened during use.
12. Never overfill the tank. This may cause the steam pressure to rise above
recommended levels.
To Next Page
Need help?
General