Supco EM60 - Operation Guide; Symbol Designations; Basic Operation

To Next Page

To Previous Page

Symbol Designations：

1. Data Hold Indicator

2. Indicates the high or low temperature setting

3. Indicates the second function key

4. Indicates type of thermocouple

5. Measurement Display area

6. Measurement Display area

7. T1-T2/ Maximum / Minimum Indicator

8. Indicates backlight ON

9. Temperature units

10. Low Battery Indicator

■. Operating Instructions

*NOTE: After abrupt ambient temperature changes,

allow instrument temperature to stabilize for 20

minutes for accurate measurements.

1. Press the ON/ OFF key to turn the unit on

2. Plug one or both thermocouples into the inputs at

the top of the instrument. If there are no thermocouples