Need help?Do you have a question about the SUPER 73 Z Series and is the answer not in the manual?
Social media and forum links for community engagement and rider interaction.
Provides company contact details, including address, phone number, and email for customer support.
Explains warning symbols like Danger and Tip, and general safety precautions for using the bike.
Advises users to check local regulations for e-bikes regarding age, speed, and road access.
Details on how to register your Super73 online or by phone to validate the warranty.
Defines the Super73's purpose for roads and paved paths only, prohibiting stunts and competitions.
Specifies the maximum load capacity and warns that unauthorized modifications void the warranty.
Illustrates and labels the main parts of the Super73-Z electric bike.
Warns to turn off the power system before any work and limits the bike to a single rider.
Lists all the tools and hardware provided with the Super73 bike for assembly.
Offers important notes like pedal identification and the critical importance of using a torque wrench for safety.
States that professional assembly by an E-bike specialist is required for valid warranty coverage.
Provides instructions for safely unpacking the bike and stabilizing it on a clean, flat surface.
Detailed steps for charging the battery, including initial charge duration and safety precautions for optimal performance.
Step-by-step guide on attaching the handlebars to the bike using the provided Allen key.
Instructions for connecting the handlebar harness cable, emphasizing careful alignment of sensitive pins.
Guides on adjusting the display angle and placement to avoid interference with brake levers or throttle.
Recommends a 45-degree angle for brake levers for optimal ergonomics and safety.
Instructions for installing pedals using a 15mm wrench, noting L/R markings and thread direction for proper fit.
Details the recommended tire pressure (20-25 psi) and the importance of checking tire condition.
A comprehensive checklist covering wheels, brakes, cables, display, and kickstand before operating the bike.
Instructions to check brake lever feel, disc clearance, and cable connections for safe operation.
Guides on turning the bike's battery and display on and off, including power-off procedures.
Explains how to engage the throttle or pedal assist levels and manage power output.
Recommends riding on paved surfaces and notes potential performance impact on rough terrain.
Discusses factors affecting battery range and the importance of charging before first use.
Mentions mechanical disk brakes and refers to online resources for adjustment tutorials.
Outlines recommended checks for brakes, tires, cables, and general condition at regular intervals.
Advises professional inspection after 200-400 km or three months for optimal bike performance.
Provides guidance on cleaning the bike using water and soap, avoiding high-pressure water jets.
Emphasizes user responsibility for safety, adherence to laws, and physical/mental capability for riding.
Lists essential rules like obeying traffic laws, using hand signals, and avoiding potential hazards.
Advises caution in wet weather, suggesting slower speeds, and the use of reflective gear.
Recommends using lights, reflectors, and reflective clothing for enhanced visibility during night riding.
Stresses reading the manual, wearing an approved helmet, and ensuring correct bike setup.
Covers off-road riding risks, extreme riding dangers, and the need for post-incident inspections.
Warns against improper battery use, unauthorized modifications, and the importance of checking brake inhibitors.
Details tire specifications, recommended pressure, and wheel alignment for safety and longevity.
Explains how to check and adjust chain tension by repositioning the rear wheel.
Mandates safety helmets and reflectors, outlining legal requirements and inspection checks.
Describes Tektro brake systems and correct lever orientation for North America vs. Global/EU.
Covers pad wear, adjustment, contamination prevention, and the importance of the brake pad break-in period.
Step-by-step guide for removing and replacing worn brake pads, including clearance adjustments.
Tips for proper battery storage, charging habits, and operating temperatures to maximize lifespan.
Advises on correct disposal methods for lithium-ion batteries and notes transportation regulations.
Lists variables like temperature, terrain, rider weight, and maintenance that impact the bike's maximum range.
Offers advice such as charging at room temperature and regular maintenance to extend the riding range.
Highlights dangers of defective batteries, charging in flammable environments, and opening the battery unit.
Emphasizes dealer inspections for electric motor operation and immediate battery removal if damage is detected.
Notes that the seat height is fixed and provides cleaning instructions to prevent fabric damage.
Information on the manufacturer's warranty for new Super73 bikes and how to access details.
Encourages owners to register their purchase on the website for warranty and support services.
General| Motor | Brushless DC Hub Motor |
|---|---|
| Frame | Steel |
| Brakes | Mechanical Disc Brakes |
| Category | Electric Bike |
| Top Speed | 20mph (Class 2) |
| Tires | 20" x 4" LZRD Tires |
To Next Page
