1. To prevent injury, do not touch the reamer blade directly with your hands as it is extremely sharp.
1. Use only genuine, proper oil.
• Touching the eyes with oil may cause infl ammation.
• Emergency treatment : Wash eyes with clean water for about 15 minutes and seek medical attention.
3. Wear protective gloves.
• If oil comes into contact with the skin, it may cause infl ammation.
• Emergency treatment : Carefully wash the affected part with soap and water.
4. Take care not to breathe in oil mist or steam.
• Breathing in oil mist or steam may cause nausea.
• Emergency treatment : Carry the person out into the fresh air, cover them with a blanket, keep them warm
and relaxed, and seek medical attention.
• Drinking the oil may cause diarrhea or vomiting
• Emergency treatment : Seek medical attention immediately, without forcing the person to vomit.
6. Do not place the oil where it is easily reached by small children.
7. Do not thin the oil or mix it with threading oil produced by other companies. If the threading oil
gets contaminated with water during the threading operation and the oil changes to a milky white,
or the quality of the oil deteriorates signifi cantly resulting in a poor fi nish to the
thread, replace the oil immediately.
8. If the threading oil gets contaminated with water during the threading operation and the oil chan-
ges to a milky white, or the quality of the oil deteriorates signifi cantly resulting in a poor fi nish to
the thread, replace the oil immediately.
9. Be particularly careful about the risk of fi re. Depending on the country of use, the oil may be clas-
sifi ed as a hazardous material. To prevent fi re or explosions, always familiarise yourself with and
comply with local laws and regulations pertaining to the handling of such materials.
• Always close the lid after use to prevent the oil from being contaminated by dust, water or other foreign
• Store in a dark place away from direct sunlight.
To Next Page
Loading...