T Series Reach-Ins
Operating Instructions
1. New upright air-cooling refrigerator should
be opened and ventilated it before it is in
use. After that, users should use warm water
to clean the inside.
2. After connecting the power supply, press the
"POWER" switch on the controller keyboard
(Green Indicator Light ON), the fridge will begin to work. The microcomputer controller,
installed in the controller keyboard, will automatically adjust the temperature ranges.
This intelligent digital controller works as: if the temperature increases and reaches set
point plus differential the compressor is started and then turned off when the
temperature reaches the set point value again.
3. Microcomputer Controller Operation
Instruction:
4. Microcomputer panel sketch map, meanings
of running indicator light and LED showing.
8
©Supera V.1.0 | October 2014
To Next Page
Loading...