EasyManua.ls Logo

Supera SSUD18-1 - Page 3

Supera SSUD18-1
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©SUPERA
V.1.0 | October 2014
INSTRUCTION
MANUAL
The manufacturer cannot be responsible for problems caused by ignoring
these safety and caution instructions.
This dishwasher is designed for commercial and industrial use.
Do not use the dishwasher for domestic use, or other purpose.
The appliance is not intended for use by young children or infirm persons
without supervisions.
During Installation
Electrical connection must be in accordance with the rating label.
Electrical safety is only guaranteed when the ground system
of your house is
in accordance with the related local regulations. (Do not use an extension or
cable cord.)
If power supply cord is damaged, it must be replaced by the manufacturer, a
service agent, or a similar qualified person in order to avoid a hazard.
The appliance is to be connected to the water main using new hose-sets and
old hose-sets should not be re-used.
During Use
Do not use any kind of solvent in your dishwasher. This may cause an
explosion or fire.
Do not spray water on the appliance. It may cause failure of electric parts or
an electric shock.
Do not use the detergent for hand washing. The detergent for the dishwasher
should only be used for normal operation.
Dishwasher detergents are strongly alkaline. They can be extremely
dangerous if swallowed. Avoid contact with skin and eyes.
After Use
Pull down circuit breaker when dishwasher is not in use anymore.
PREVENT ELECTRICAL LEAKAGE AND SHOCK
Make sure to ground the wire to electrode to avoid electrical accidents.
Grounding All exposed dead-metal parts are connected to the grounding lead of
the power supply cord or the equipment grounding terminal.