To Next PageTo Next Page
Need help?Do you have a question about the Superen HYBRID-ACDC12-EU/US and is the answer not in the manual?
Covers symbols and text indicating warnings and cautions for potential hazards during installation and operation.
Essential requirements for proper installation by authorized personnel and use of specified parts.
Provides a visual summary of the key steps involved in installing the indoor unit.
Checks before installation, selecting an appropriate location, and forbidden installation spots.
Details on attaching the mounting plate, drilling the wall hole, and plate dimensions.
Instructions for preparing refrigerant piping, cutting, and notes on piping angle.
Steps for connecting the drain hose, placement notes, and plugging unused holes.
Outlines regulations for electrical work, safety warnings, and precautions.
Covers connecting signal cables, fuse specs, cable sizing, and wiring diagrams.
Steps for wrapping pipes and cables, mounting the indoor unit, and unit adjustability.
Guidelines for choosing the outdoor unit's location and considerations for extreme weather.
Instructions for installing the drain joint and anchoring the outdoor unit to the ground or wall.
Specifications for outdoor unit sizes and mounting feet distances.
Steps for installing on a wall-mounted bracket and connecting signal/power cables.
Guidance on pipe length, cutting, removing burrs, and flaring pipe ends for proper connection.
Instructions for connecting pipes, minimum bend radius, and torque requirements for secure joints.
Procedures and precautions for evacuating the refrigerant circuit to remove moisture and gases.
Information on adding refrigerant based on pipe length and calculating additional amounts.
Procedures to ensure proper grounding and check for electrical leakage before operation.
Methods for detecting refrigerant leaks using soapy water or a leak detector.
Essential requirements, general safety rules, and precautions for installing solar PV systems.
Steps for selecting installation locations, support frames, ground, roof, and pole mounting.
Guidelines for electrical connections, wiring, grounding principles, and solar array setup.
Steps to complete before the test run, including safety checks and confirming connections.
Instructions for performing the test run, double-checking connections, and handling cold weather.
General| Power Source | Hybrid (AC/DC) |
|---|---|
| Plug Type | EU/US |
| Type | Portable Air Conditioner |
| Cooling Capacity | 12000 BTU |
| Operating Temperature | 16-35°C |
| Refrigerant | R410A |
| Weight | 30 kg |
| Noise Level | 52 dB |
