5
Programming
With the Fish Feeder controller you can easily set between 1 and 24
automatic feedings per day.
The quantity of food can be set (in steps), so you can vary the amount
per feeding.
By pressing the 'Manual' button the Fish Feeder gives a small amount
of food.
You turn the Fish Feeder on by plugging the plug into the socket.
Set the current time (clock)
Press SET during 3 seconds
--:--
Press (short) SET:thehourswillash
00:00
Press UP or DOWN to set the hours
12:00
Press (short) SET:theminuteswillash
12:00
Press UP or DOWN to set the minutes
12:25
Press SETtoconrmthesettimeandwaitfor8seconds
--:--
The current time (clock) is set.
12:25
Setting the automatic feedings
Press SET during 3 seconds
--:--
Press UP: the display shows 01oN
01 n_ �
(the Fish Feeder is set to one feeding at 10 am by default)
Press (short) SETtosettherstfeedingtime:thehourswillash
10:00
Press UP or DOWN to set the hours
08:00
Press (short) SET:theminuteswillash
08:00
Press UP or DOWN to set the minutes
08:15
Press SET to set the food quantity in steps from 01 to 10
:01
(01 is the setting for the smallest amount of food, 10 for the largest quantity)
Press UP for the next step (02, 03, 04, ....)
:02
Press SETtoconrmtherstfeeding
01 n_ �
00:00
SET
UP
DOWN
manual