EasyManua.ls Logo

Superia 100 - General Information; Technical Characteristics

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Superia 100 / 92 110 219 01
1. General information
Dear user!
When you purchased this Superia 100 wood-burning stove, you chose a modern and innovative combustion
and heating appliance. Our warmest congratulations!
If you wish to achieve maximal performance in terms of ecological and economical considerations, you
should comply with this installation and operation manual and carry out its instructions.
If the wood-burning stove is damaged due to non-compliance with the installation and operation manual, the
guarantee will no longer be valid. Unauthorised modifications of the appliance are not allowed.
Use only replacements part recommended by the manufacturer.
If the wood-burning stove is built in, the applicable laws and local regulations regarding fire prevention and
architecture should be complied with.
2. Technical characteristics
TYPE
Superia 100
Nominal heating capacity
kW
9
Heating limits
kW
5 - 14
Efficiency wood
wood briquettes
brown coal briquettes
%
%
%
75
74
69
Flue gas temperature at nominale power
°C
330
Chimneydraft
Pa
12
Draft limits
Pa
8 - 20
Percentage of CO at 13%O2 wood
wood briquettes
brown coal briquettes
%
%
%
0.18
0.16
0.07
Dimensions of the stove
Height
mm
765
Width
mm
715
Depth
mm
570
Height up to lower edge of connector pipe
mm
480
Outside diameter of the connector pipe
Ø mm
150
Weight of the stove
Not packaged
about kg
186
Packed
about kg
194
Fuel
Wood / wood
briquettes /
brown coal
briquettes
Maximum length of the firewood and wood briquettes
mm
500
Maximum diameter
mm
100
Maximum humidity
%
20
Charge
About kg
2
Maximum charge
About kg
3
English

Table of Contents