Superior Electronics AirCo

To Next Page

MANUAL: AIRCO

AIRCO CONFIGURATION

Please insert 2 alkaline batteries 1,5V type AAA.

There are two 2 ways to conﬁgure your new remote control A/B:

A) DIRECT CODE SETUP

1. Check the code list, please ﬁnd the right code for your brand (major brands have got multiple codes to test)

Power on the air conditioner manually and aim the remote control towards the air conditioner.

2. Hold the "SET" Key (at least 3 seconds) until the code flashes in the display.

Press Temperature Keys "+" or "-" to reach the right code you want to choose.

3. Press the "OK" Key and the code will be stored.

4. Check wheter the keys on the remote control work normally. If not, repeat steps 2/3/4

until ﬁnding a suitable code.

B) MANUAL CODE SEARCH

1. Power "on" the air conditioner manually and aim the remote control towards the air conditioner.

2. Press and keep pressed the "SET" Key until the code flashes in the display,

now browse all the codes by pressing the Temperature "+" Key until the air conditioner

automatically turns off. Press the "OK" Enter Key to store the right code and ﬁnish the setup procedure.

REMOTE CONTROL KEYBOARD

1. Temperature Display

2. Fan Display

3. Temperature "+' key

4. Fan Direction Control key

5. Fan Key

6. HOT Fast Heat Key

7. TIME ON Timer On Key

8. SET

9. Run Mode Display

10. Signal Display

11. Fan Direction Display

12. Brand Code

13. Temperature "-" key

14. MODE Key

15. Automatic Fan Direction

16. POWER

17. COOL Fast Cool Key

18. TIME OFF Timer off Key

19. OK Enter Key

20. CLOCK

INSTRUCTION MANUAL

FEATURES

FAST COOL / FAST HEAT FUNCTION

Press "COOL" Fast Cool Key to automatically set the air conditioner to 21°C, middle fan and automatic blowing direction.

Press "HOT" Fast Heat Key to automatically set the air conditioner to 27°C, middle fan and automatic blowing direction.

TIMING ON/OFF FEATURE

Press "TIME ON" Key to increase the starting time for the air conditioner by 1 hour. The displayed time is the time when air

conditioner will automatically be switched on.

Pressing "TIME OFF" Key will delay the time air conditioner will be turned off by 1 hour each time the key is pressed.

Always aim the remote control towards the air conditioner while operating on the remote control.

SETTING TIME FUNCTION

Press "CLOCK" Key to enter the clock setting state, clock will flash.

Now adjust the current time by pressing Temperature "+" "-", once done press "CLOCK" Key again to exit the menu.

DECLARATION OF CE CONFORMITY

This product has been manufactured and supplied in compliance with all relevant

regulations and directives valid for all member states of European Union.

Formal documentation is kept by Superior Srl and available upon request.

WARRANTY

This product is covered by a 2 years guarantee from the date of purchase against any manufacturing defects,

excluding any defects arising from improper use. A purchase document must be produced along with the request

of repairing. Costs of return are at buyer’s expense.

ATTENTION

In compliance with directive 2012/19/EU D.L N° 49/2014, Superior Srl, being the supplier of this product issues

the following information: it is mandatory not to dispose of the RAEE as if were urban waste, but to collect them

separately. When delivering the product upon purchasing a new one, the same manufacturer shall provide

recycling through implemented and approved measures. This information is provided in order to prevent

potential effects on the environment and human health due to the presence of dangerous substances in

electronic equipments or due to an improper use. Therefore every electronic equipment sold shall be subject to

to this directive and shall be marked with the symbol shown here below.

1 9

All manuals and user guides at all-guides.com

all-guides.com

Other manuals for Superior Electronics AirCo

Instruction Manual2 pages

Need help?

Do you have a question about the Superior Electronics AirCo and is the answer not in the manual?

Summary

Airco Remote Control Guide

Remote Control Keyboard Layout

Identifies and describes each key on the Airco universal remote control for easy operation.

Fast Cool and Heat Mode Functions

Explains how to activate rapid cooling or heating to quickly reach desired temperatures.

Setting Airco Timer Functions

Instructions for programming the automatic on/off timer for the air conditioning unit.

Setting the Remote Control Clock

Step-by-step guide to setting the correct time on the remote control display.

Airco Configuration Procedures

Direct Code Setup for Airco Remote

Method to configure the remote by directly entering the code for the specific air conditioner brand.

Manual Code Search for Airco Remote

Process to automatically scan and find the correct code for the air conditioner if the direct code is unknown.

Product Warranty and Compliance

Airco Product Warranty Information

Details the 2-year guarantee, conditions for claims, and repair request procedures.

CE Conformity and Waste Disposal

Declaration of compliance with EU directives and information regarding WEEE disposal of the product.

Supported Air Conditioner Brands

This document describes the AirCo Universal Remote Control, a device designed to operate various brands of air conditioners.

Function Description

The AirCo Universal Remote Control serves as a replacement or universal controller for a wide range of air conditioning units. Its primary function is to provide remote access to the air conditioner's settings, including temperature, fan speed, mode, and timing functions. The remote supports both direct code setup and manual code search methods to ensure compatibility with numerous AC brands.

Important Technical Specifications

Power Source: 2 alkaline batteries, 1.5V type AAA (LR03/AM4). Batteries are not included.
Compatibility: Designed to work with a vast array of air conditioner brands, as detailed in the extensive code list provided in the manual.
Operating Range: Standard infrared (IR) remote control range, requiring direct line of sight to the air conditioner's IR receiver.
Display: Features an LCD screen for displaying temperature, fan settings, run mode, signal, fan direction, brand code, and current time.

Usage Features

The remote control offers a comprehensive set of features for managing an air conditioner:

Remote Control Keyboard Layout

Temperature Display: Shows the current set temperature.
Fan Display: Indicates the current fan speed or setting.
Temperature "+" key: Increases the set temperature.
Fan Direction Control key: Adjusts the direction of the air flow.
Fan Key: Cycles through fan speed settings (e.g., auto, low, medium, high).
HOT Fast Heat Key: Activates the "Fast Heat" function.
TIME ON Timer On Key: Sets a timer for the air conditioner to turn on.
SET: Used for entering setup modes (e.g., code setup, clock setting).
Run Mode Display: Shows the current operating mode (e.g., Cool, Heat, Fan, Dry, Auto).
Signal Display: Indicates when a signal is being transmitted.
Fan Direction Display: Shows the current fan direction setting.
Brand Code: Displays the code currently programmed for the air conditioner brand.
Temperature "-" key: Decreases the set temperature.
MODE Key: Cycles through operating modes (Cool, Heat, Fan, Dry, Auto).
Automatic Fan Direction: Toggles automatic fan swing.
POWER: Turns the air conditioner on or off.
COOL Fast Cool Key: Activates the "Fast Cool" function.
TIME OFF Timer off Key: Sets a timer for the air conditioner to turn off.
OK Enter Key: Confirms selections during setup or clock setting.
CLOCK: Enters and exits the clock setting mode.

Fast Cool/Fast Heat Function

COOL Fast Cool Key: Automatically sets the air conditioner to 21°C, middle fan speed, and automatic blowing direction for rapid cooling.
HOT Fast Heat Key: Automatically sets the air conditioner to 27°C, middle fan speed, and automatic blowing direction for rapid heating.

Timing On/Off Feature

TIME ON Key: Each press increases the air conditioner's starting time by 1 hour. The displayed time indicates when the AC will automatically switch on.
TIME OFF Key: Each press delays the air conditioner's turn-off time by 1 hour.
Important Note: Always aim the remote control towards the air conditioner when using these functions.

Setting Time Function

CLOCK Key: Press to enter clock setting mode; the clock display will flash.
Adjust the current time using the "Temperature +" and "-" keys.
Press the "CLOCK" Key again to exit the menu and save the time.

AirCo Configuration (Setup Procedures)

The remote control can be configured using two methods:

A) Direct Code Setup:

Consult the provided code list to find the appropriate code for your air conditioner brand. Note that major brands may have multiple codes.
Manually power on the air conditioner and aim the remote control towards it.
Hold the "SET" Key for at least 3 seconds until the brand code flashes on the display.
Use the "Temperature +" or "-" keys to browse through codes until you find the correct one for your AC.
Press the "OK" Key to store the selected code.
Verify that all remote control keys function correctly. If not, repeat steps 2-4 until a suitable code is found.

B) Manual Code Search:

Manually power on the air conditioner and aim the remote control towards it.
Press and hold the "SET" Key until the code flashes on the display.
Continuously press the "Temperature +" Key. The remote will cycle through codes. Stop when the air conditioner automatically turns off, indicating a match.
Press the "OK" Enter Key to store the code and complete the setup.

Maintenance Features

Battery Replacement: The manual specifies the use of 2 AAA alkaline batteries. Regular replacement is the only user-level maintenance required.
Cleaning: While not explicitly stated, general remote control cleaning practices (e.g., wiping with a soft, dry cloth) would apply.

Warranty and Compliance

Warranty: The product is covered by a 2-year guarantee from the purchase date against manufacturing defects, excluding defects from improper use. A purchase document is required for repairs, and return costs are at the buyer's expense.
CE Conformity: The product is manufactured and supplied in compliance with all relevant regulations and directives valid for European Union member states. Formal documentation is kept by Superior Srl.
WEEE (Waste Electrical and Electronic Equipment) Compliance: In accordance with directive 2012/19/EU D.L N° 49/2014, Superior Srl states that RAEE (WEEE) must not be disposed of as urban waste but collected separately. When purchasing a new product, the manufacturer will provide recycling through approved measures. This information aims to prevent environmental and human health effects from dangerous substances in electronic equipment or improper use. The product is marked with the WEEE symbol (crossed-out wheeled bin).
RoHS Compliant: The product also carries the RoHS compliance mark, indicating adherence to restrictions on hazardous substances.