2
3
FRANÇAIS
ENGLISH
ENGLISHFRANÇAIS
2
3
FRANÇAIS
ENGLISH
ENGLISHFRANÇAIS
IMPORTANT SAFETY INSTRUCTIONS
use this tool.
EMPLOYER’S RESPONSIBILITIES
contained in this manual.
-
OPERATING INSTRUCTIONS
FN2890
nails.
POWER SOURCE
CAUTION:
All line components (hoses, connectors, lters, regulators, etc.) must meet 150% of the
maximum system pressure. Please try to use a hose of ID 3/8” connecting nailer with
compressor.
Do not connect this tool to a system with maximum potential pressure greater than 180
PSI, (12.3 BAR)
Disconnect your air line from your nailer using the quick connect on the air hose. Do
not unscrew the air inlet from the nailer with your air hose connected.
Disconnect tool from air supply before performing maintenance clearing a jammed
fastener, leaving work area, moving tool to another location, or handing the tool to
another person.
PREPARING THE TOOL
CAUTION:
Keep tool pointed away from yourself and others at all times.
Always disconnect tool to air supply before loading fasteners.
Do not load fasteners with trigger or safety pressed.
Always wear approved safety glasses, and hearing protection when preparing or oper-
ating the tool.
To Next Page
Loading...