To Next PageTo Next Page
Need help?Do you have a question about the Superior VINYL PERGOLA and is the answer not in the manual?
Mark outline for column mounts, ensuring even spacing for multiple columns.
Secure leveling plate and column mount, mark holes, and drill into concrete.
Ensure column mount is plumb using adjustment screws for proper vertical alignment.
Install pressure-treated wood post in concrete, ensuring proper depth and frost line coverage.
Secure concrete column mount to the wood post using staggered screws for stability.
Position the vinyl column over the installed column mount.
Install bottom, mid (if used), and top trim rings over the column.
Square bottom trim ring, mark guides, and drill holes for secure placement.
Insert lumber or aluminum channels into beams, ensuring flat sides face each other.
Align beams, clamp together, mark ends, and draw lines for bracket intervals.
Affix stringer brackets to beams according to the specified spacing.
Fasten bolt through beam mount and re-attach cap after removing the mount cap.
Predrill holes and attach beams to beam mounts, ensuring correct channel orientation.
Position the assembled beam structure atop the installed columns.
Predrill holes and attach beam mounts to the beam assembly using specified screws.
Predrill holes and attach top trim to the beam assembly using screws.
Secure rafters to the stringer brackets, driving screws through vinyl rafters into channels.
Insert louvers into rafters and fasten shades to end rafters.
Fasten shade covers to the structure with screws, ensuring equal end spacing.
Glue and attach end caps to the appropriate surfaces for a finished look.
Mark outline for column mounts, ensuring even spacing for multiple columns.
Secure leveling plate and column mount, mark holes, and drill into concrete.
Ensure column mount is plumb using adjustment screws for proper vertical alignment.
Install pressure-treated wood post in concrete, ensuring proper depth and frost line coverage.
Secure concrete column mount to the wood post using staggered screws for stability.
Position the vinyl column over the installed column mount.
Install bottom, mid (if used), and top trim rings over the column.
Square bottom trim ring, mark guides, and drill holes for secure placement.
Insert lumber or aluminum channels into beams, ensuring flat sides face each other.
Align beams, clamp together, mark ends, and draw lines for bracket intervals.
Affix stringer brackets to beams according to the specified spacing.
Fasten bolt through beam mount and re-attach cap after removing the mount cap.
Predrill holes and attach beams to beam mounts, ensuring correct channel orientation.
Position the assembled beam structure atop the installed columns.
Predrill holes and attach beam mounts to the beam assembly using specified screws.
Predrill holes and attach top trim to the beam assembly using screws.
Secure rafters to the stringer brackets, driving screws through vinyl rafters into channels.
Insert louvers into rafters and fasten shades to end rafters.
Fasten shade covers to the structure with screws, ensuring equal end spacing.
Glue and attach end caps to the appropriate surfaces for a finished look.
General| Brand | Superior |
|---|---|
| Model | VINYL PERGOLA |
| Category | Outdoor Furnishing |
| Language | English |
