Supermicro M11SDV-4C-LN4F - Page 86

Super M11SDV-4C/4CT/8C/8CT/8C+-LN4F User's Manual
86
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
VLAN
This feature is congurable if the Update IPMI LAN Conguration feature is set to Yes.
Use this feature to enable or disable the IPMI VLAN function. The options are Disable
and Enable.
*If the feature above is set to Enabled, the VLAN ID feature below is available for
conguration:
VLAN ID
Use this feature to select a value for VLAN ID. The default setting is 1.
Congure IPV6 Support
IPV6 Address Status
IPV6 Support
Use this feature to enable IPV6 support. The options are Enabled and Disabled.
Conguration Address Source
Use this feature to select the source of the IP address for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system manually in
the eld. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Conguration
Protocol) server in the network that is attached to and request the next available IP address
for this computer. The options are Static and DHCP.
*If the feature above is set to Static, the Station IP Address/Prex Length/IPV6 Router1
IP Address features are available for conguration:
Station IPV6 Address
Use this feature to enter the IPV6 address.
Prex Length
Use this feature to change the prex length.
IPV6 Router1 IP Address
Use this feature to change the IPV6 Router1 IP address.