15
Chapter 1: Introduction
Motherboard Features
BIOS
• 256Mb Aten BIOS
• ACPI 3.0 or later, SPI dual/quad speed support, and SMBIOS 2.7 or later
Power Management
• ACPI power management
• Power button override mechanism
• Wake-On-LAN
• Power-on mode for AC power recovery
• Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20.)
• Management Engine (ME)
System Health Monitoring
• Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V standby, +5V standby, HT, memory, chipset temperature,
system temperature, and memory temperature
• CPU 5-phase switching voltage regulator
• CPU thermal trip support
• Status monitor for on/o control
• CPU Thermal Design Power (TDP) support of up to 145W (See Note 1 on next page.)
Fan Control
• Five 4-pin fan headers
• Fan status monitoring via IPMI connections
• Multi-speed fan control via onboard BMC
System Management
• Trusted Platform Module (TPM) support
• PECI (Platform Environment Control Interface) 2.0 support
• Power supply monitoring
• SuperDoctor® 5, Watch Dog, Non-maskable interrupt (NMI), RoHS
• Chassis intrusion header and detection (Note: please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
• CPU/Overheating
• Power/Suspend-state indicator
• Fan failure
• UID/remote UID
• HDD activity
• LAN activity
Dimensions
• 12" (L) x 13" (W) (30.48 mm x 33.02 mm)
To Next Page
Loading...
