Super X11DDW-L/N(T) User's Manual
210
Authentication Type
Use this feature to set the authentication method. The options are CHAP and None.
CHAP Type (available when Authentication Type is set to CHAP)
Use this feature to set the CHAP type. The options are One way and Mutual.
Note: Challenge handshake authentication protocol (CHAP) is a protocol used to verify
the identity of the peer of a connection.
Note 1: If one way (unidirectional) CHAP authentication is performed, the iSCSI target
authenticates the iSCSI initiator.
Note 2: If mutual (bidirectional) CHAP authentication is performed, the iSCSI target
and iSCSI initiator authenticate each other.
To Next Page
Loading...
